LTC3452 - Synchronous Buck-Boost MAIN/CAMERA White LED Driver

The LTC3452 is a synchronous buck-boost DC/DC converter optimized for driving two banks of white LEDs from a single Li-Ion battery input. Five parallel LEDs CAN be driven at up to 25mA each in the low power LED bank, while two LEDs CAN be driven at up to 150mA each (or a single LED at 300mA) in the high power LED bank. The Regulator operates in either synchronous buck, synchronous boost or buck-boost mode, depending on input voltage and LED maximum forward voltage. Optimum efficiency is achieved by sensing which LED requires the largest forward voltage drop at its programmed current, and regulating the common output rail for lowest dropout. Efficiency of 85% CAN be achieved over the entire usable range of a Li-Ion battery (2.7V to 4.2V). Maximum LED current for each LED Display is programmable with a single external resistor. Dual enable pins allow for PWM brightness control in the low power bank and independent on/off control for the high current bank (optimal for LED camera flash). In shutdown, the supply current is only 6.5A.
A high constant operating frequency of 1MHz allows the use of a small external inductor. The LTC3452 is offered in a low profile (0.75mm) thermally enhanced 20-lead (4mm 4mm) QFN package.
By Linear Technology Corporation
LTC3452 's PackagesLTC3452 's pdf datasheet
LTC3452EUF-PBF QFN
LTC3452EUF-TRPBF QFN




LTC3452 Pinout, Pinouts
LTC3452 pinout,Pin out
This is one package pinout of LTC3452,If you need more pinouts please download LTC3452's pdf datasheet.

LTC3452 Application circuits
LTC3452 circuits
This is one application circuit of LTC3452,If you need more circuits,please download LTC3452's pdf datasheet.


Related Electronics Part Number

Related Keywords:

LTC3452 Pb-Free LTC3452 Cross Reference LTC3452 Schematic LTC3452 Distributor
LTC3452 Application Notes LTC3452 RoHS LTC3452 Circuits LTC3452 footprint