LTC4300A-1 - Hot Swappable 2-Wire Bus Buffers
The LTC4300A series hot swappable 2-wire bus Buffers allow I/O card insertion into a live Backplane without corruption of the data and Clock busses. When the connection is made, the LTC4300A-1 LTC4300A-2 provide bidirectional buffering, keeping the Backplane and card capacitances isolated. Rise-time accelerator circuitry* allows the use of weaker DC pull-up currents while still meeting rise-time requirements. During insertion, the SDA and SCL lines are precharged to 1V to minimize bus disturbances.
The LTC4300A-1 incorporates a CMOS threshold digital ENABLE input pin, which forces the part into a low current mode when driven to ground and sets normal operation when driven to VCC. It also includes an open drain READY output pin, which indicates that the Backplane and card sides are connected together. The LTC4300A-2 replaces the ENABLE pin with a dedicated supply voltage pin, VCC2, for the card side, providing level shifting between 3.3V and 5V systems. Both the Backplane and card may be powered with supply voltages ranging from 2.7V to 5.5V, with no contraints on which supply voltage is higher. The LTC4300A-2 also replaces the READY pin with a digital CMOS input pin, ACC, which enables and disables the rise-time accelerator currents.
The LTC4300A is available in a small 8-pin MSOP package.
*U.S. Patent No. 6,650,174
By Linear Technology Corporation
|PC-SOIC/DIP20-04||Ironwood Electronics||SOIC to DIP Package Converters; Top Package Code: SO20A_SO20B_SO20D; Bottom Package Code: 0.3; Top Pitch (mm): 1.27; Bottom Pitch (mm): 2.54; Top Pin Count: 20; Bottom Pin Count: 20; Top Array Size: N/A; Bottom Array Size: N/A; Top Interface: SOIC Land Pattern; Bottom Interface: Thru Hole Pins; Inside Land Dim. - Ouside land dim. (in.): 0.275 - 0.475; Adapter Size Length X Width (in.): 1 x 0.4; Part Description: SOIC to DIP Converter;|
|CK5373A||Cirrus Logic||Evaluation, Design Tools Seismic Kit 1/CS5373A 1/CS5378|
|CS5530-ISR||Cirrus Logic||Converters - Analog to Digital (ADC) IC 24-Bit 1-ch Low Noise ADC|
|CS5530-ISZR||Cirrus Logic||Converters - Analog to Digital (ADC) IC 24-Bit 1-ch Low Noise ADC|
|CS4461-CZZ||Cirrus Logic||IC 1-CH DELTA-SIGMA ADC, PDSO24, 4.40 MM, TSSOP-24, Analog to Digital Converter|
|CS4461-CZZR||Cirrus Logic||IC 1-CH DELTA-SIGMA ADC, PDSO24, 4.40 MM, TSSOP-24, Analog to Digital Converter|
|CS5509-AP||Cirrus Logic||IC 1-CH 16-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PDIP16, PLASTIC, DIP-16, Analog to Digital Converter|
|CS5509-ASZ||Cirrus Logic||IC 1-CH 16-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PDSO16, LEAD FREE, SOIC-16, Analog to Digital Converter|
|CS5525-ASZ||Cirrus Logic||IC 1-CH 16-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PDSO20, 0.200 INCH, LEAD FREE, PLASTIC, SSOP-20, Analog to Digital Converter|
|CS5560-ISZ||Cirrus Logic||IC 1-CH 24-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PDSO24, MO-150, SSOP-24, Analog to Digital Converter|
|LTC4300A-1 Pb-Free||LTC4300A-1 Cross Reference||LTC4300A-1 Schematic||LTC4300A-1 Distributor|
|LTC4300A-1 Application Notes||LTC4300A-1 RoHS||LTC4300A-1 Circuits||LTC4300A-1 footprint|