LTC4307 - Low Offset Hot Swappable 2-Wire Bus Buffer With Stuck Bus Recovery
The LTC4307 hot swappable, 2-wire bus Buffer allows I/O card insertion into a live Backplane without corruption of the data and Clock busses. The LTC4307 provides bidirectional buffering, keeping the Backplane and card capacitances isolated. Low offset and high VOL tolerance allows multiple devices to be cascaded on the Clock and data busses. If SDAOUT or SCLOUT are low for 30ms, the LTC4307 will automatically break the bus connection. At this time the LTC4307 automatically generates up to 16 Clock pulses on SCLOUT in an attempt to free the bus. A connection will resume if the stuck bus is cleared.
During insertion, the SDA and SCL lines are pre-charged to 1V to minimize bus disturbances. When driven high, the ENABLE input allows the LTC4307 to connect after a stop bit or bus idle. Driving ENABLE low breaks the connection between SDAIN and SDAOUT, SCLIN and SCLOUT. READY is an open-drain output which indicates that the Backplane and card sides are connected.
By Linear Technology Corporation
|LTC4307 Pb-Free||LTC4307 Cross Reference||LTC4307 Schematic||LTC4307 Distributor|
|LTC4307 Application Notes||LTC4307 RoHS||LTC4307 Circuits||LTC4307 footprint|