CD40109B contains four low-to-high-voltage level-shifting circuits. Each circuit will shift a low-voltage digital-logic input signal (A, B, C, D) with logical 1 = VCC and logical 0 = VSS to a higher-voltage output signal (E, F, G, H) with logical 1 = VDD and ...
This 16-bit (dual-octal) noninverting bus transceiver contains two separate supply rails. B port has VCCB, which is set to operate at 3.3 V and 5 V. A port has VCCA, which is set to operate at 2.5 V and 3.3 V. This allows for translation from a 2.5-V to a ...
This 16-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC16T245 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. It is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. ...
The SN74AVC1T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the ...
The SN74AVC24T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) ...
The SN74AVC32T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) ...
The SN74AVC4T245 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into ...
The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) ...
The SN74AVCA164245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\\ ...
The SN74AVCAH164245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\\ ...
The SN74AVCB164245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) ...
The SN74AVCBH164245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\\ ...
This single-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage ...
The SN74AVCH2T45 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. ...
The SN74AVCH4T245 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into ...
The SN74LVC1T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the ...
The SN74LVC2T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the ...
This 8-bit (octal) noninverting bus transceiver contains two separate supply rails; B port has VCCB, which is set at 3.3 V, and A port has VCCA, which is set at 5 V. This allows for translation from a 3.3-V to a 5-V environment, and vice versa. The ...
The SN74LVC8T245 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into ...
This 8-bit (octal) noninverting bus transceiver contains two separate supply rails. The B port is designed to track VCCB, which accepts voltages from 3 V to 5.5 V, and the A port is designed to track VCCA, which operates at 2.3 V to 3.6 V. This allows for ...
This 8-bit (octal) noninverting bus transceiver uses two separate power-supply rails. The A port, VCCA, is dedicated to accept a 5-V supply level, and the configurable B port, which is designed to track VCCB, accepts voltages from 3 V to 5 V. This allows for ...
This 16-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 5.5 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from ...
This 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. VCCA must be less than or equal to VCCB. The B port is designed to track VCCB. ...
This octal ECL-to-TTL translator is designed to provide a efficient translation between a 10KH ECL signal environment and a TTL signal environment. This device is designed specifically to improve the performance and density of ECL-to-TTL CPU/bus-oriented ...
This octal ECL-to-TTL translator is designed to provide efficient translation between a 10KH ECL signal environment and a TTL signal environment. This device is designed specifically to improve the performance and density of ECL-to-TTL CPU/bus-oriented ...
This octal TTL-to-ECL translator is designed to provide efficient translation between a TTL signal environment and a 10KH ECL signal environment. This device is designed specifically to improve the performance and density of TTL-to-ECL CPU/bus-oriented ...
The SN74CB3T1G125 is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks ...
The SN74TVC16222A provides 23 parallel NMOS pass transistors with a common gate. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device can be used as a 22-bit switch, with the gates cascaded ...
The SN74TVC3010 provides 11 parallel NMOS pass transistors with a common gate. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device can be used as a 10-bit switch with the gates cascaded ...
The SN74TVC3306 provides three parallel NMOS pass transistors with a common unbuffered gate. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device can be used as a dual switch, with the gates ...
This device TXB0101 is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. ...
This device TXB0102 is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. ...
The TXB0104 is designed so that the OE input circuit is supplied by VCCA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it ...
The TXB0101 is desinged so that the OE input circuit is supplied by VCCA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it ...
The SN74AUP1T57 can be easily configured to perform a required gate function by connecting A, B, and C inputs to VCC or ground (see Function Selection table). Up to nine commonly used logic gate functions can be performed. ...
The SN74AUP1T58 can be easily configured to perform a required gate function by connecting A, B, and C inputs to VCC or ground (see Function Selection table). Up to nine commonly used logic gate functions can be performed. ...
The SN74AUP1T97 can be easily configured to perform a required gate function by connecting A, B, and C inputs to VCC or ground (see Function Selection table). Up to nine commonly used logic gate functions can be performed. ...
The SN74AUP1T98 can be easily configured to perform a required gate function by connecting A, B, and C inputs to VCC or ground. Up to nine commonly used logic gate functions can be performed. ...
The SN74GTL2007 is a 12-bit translator to interface between the 3.3-V LVTTL chip set I/O and the Xeon. processor GTL-/GTL/GTL+ I/O. The device is designed for platform health management in dual-processor applications. ...
The SN74GTL2107 is a 12-bit translator that interfaces between the 3.3-V LVTTL chip set I/O and the Xeon?? processor GTL-/GTL/GTL+ I/O. The device is designed for platform health management in dual-processor applications ...
The CF4320H is a CompactFlash?? (CF) interface device designed to provide a single-chip solution for CF card interfaces. Separate VCC rails for the system-bus side and the CF connector-bus side allow voltage-level shifting. This is helpful for interfacing ...
The SN74AVCA406 is a transceiver for interfacing microprocessors with MultiMediaCards (MMCs), secure digital (SD) cards, Memory Stick?? compliant products, SmartMedia cards, or xD-Picture Cards??. It integrates high ESD protection, which eliminates the need ...
The SN74AVCA406E is a transceiver for interfacing microprocessors with MultiMediaCards (MMCs), secure digital (SD) cards, and Memory Stick compliant products. ...
The SN74AVCA406L is a transceiver for interfacing microprocessors with MultiMediaCards (MMCs), secure digital (SD) cards, and Memory Stick?? compliant products. ...
This CompactFlash? (CF) interface chip is designed to provide a single-chip solution for CF card interfaces. Separate VCC rails for the system bus side and the CF connector bus side allow voltage-level shifting. This is helpful for interfacing between a core ...
The TXS03121 is a comparator designed for battery monitoring applications. It can be operated with a voltage of 3 V to 5.5 V. The reference voltage is applied to the IN terminal, whereas the voltage to be monitored is connected to +IN. When the voltage at +IN ...
The ADG3123 is an 8-channel, noninverting CMOS to high voltage level translator. Fabricated on an enhanced LC2MOS process, the device is capable of operating at high supply voltages while maintaining ultralow power consumption.
The internal architecture ...
The ADG3231 is a Level Translator designed on a sub
micron process which operates from supplies as low as
1.65 V. The device is guaranteed for operation over the
supply range 1.65 V to 3.6 V. It operates from two supply
voltages allowing bi-directional ...
The ADG3232 is a Level Translator 2-1 Mux designed
on a sub micron process which operates from supplies as
low as 1.65 V. The device is guaranteed for operation over
the supply range 1.65 V to 3.6 V. It operates from two
supply voltages allowing ...
The ADG3233 is a bypass switch designed on a sub micron process which operates from supplies as low as
1.65 V. The device is guaranteed for operation over the supply range 1.65 V to 3.6 V. It operates from two supply
voltages allowing bi-directional level ...
The ADG3300 is a bidirectional logic level translator that con-tains eight bidirectional channels. It can be used in multivoltage digital system applications such as data transfer between a low voltage DSP/controller and a higher voltage device. The internal ...
The ADG3301 is a single channel bidirectional logic level
translator. It can be used in multivoltage digital system
applications such as data transfer between a low voltage
DSP/controller and a higher voltage device. The internal
architecture allows the ...
The ADG3308/ADG3308-1/ADG3308-2 are bidirectional Level Translators containing eight bidirectional channels. They can be used in multivoltage digital system applications, such as a data transfer between a low voltage DSP controller and a higher voltage device. ...
The ADG3304 is a bidirectional logic level translator that contains four bidirectional channels. It can be used in multivoltage digital system applications such as data transfer between a low voltage DSP/controller and a higher voltage device using SPI and ...
The ADG3241 is a 2.5 V or 3.3 V, single digital switch. It is
designed on a low voltage CMOS process, which provides low
power dissipation yet gives high switching speed and very low on
resistance. This allows the input to be connected to the ...
The ADG3242 is a 2.5 V or 3.3 V, 2-bit, 2-port common-control digital switch. It is designed on a low voltage CMOS process, which provides low power dissipation yet gives high switching speed and very low on resistance. This allows the inputs to be connected ...
The ADG3243 is a 2.5 V or 3.3 V, 2-bit, 2-port digital switch with individual channel control. It is designed on a low voltage CMOS process, which provides low power dissipation yet gives high switching speed and very low on resistance. This allows the inputs ...
The FXL4TD245 is a configurable 4-bit
dual-voltage supply translator designed for both uni-directional and
bi-directional voltage translation between two logic levels. The device allows
translation between voltages as high as 3.6V to as low as 1.1V. The ...
The FXLH1T45 is a single bit configurable dual-voltage supply
translator designed for both uni-directional and bi-directional voltage
translation between two logic levels. The device allows translation between
voltages as high as 3.6V to as low as 1.1V. ...
The FXLP34 is a single translator with two separate supply voltages: VCC1 for input translation voltages and VCC for output translation voltages.The FXLP34 is part of Fairchild\'s Ultra Low Power (ULP) series of products. This device operates with VCC values ...
The FXL2T245 is a configurable dual-voltage-supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks ...
The LVX4245 is a dual-supply, 8-bit translating transceiver that is designed to interface between a 5V bus and a 3V bus in a mixed 3V/5V supply environment. The Transmit/Receive (T/R#) input determines the direction of data flow. Transmit (active-HIGH) enables ...
The LVX3245 is a dual-supply, 8-bit translating transceiver that is designed to interface between a 3V bus and a 5V bus in a mixed 3V/5V supply environment. The Transmit/Receive (T/R#) input determines the direction of data flow. Transmit (active-HIGH) enables ...
The FXL4T245 is a configurable dual-voltage-supply translator designed for bi-directional voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA ...
The FXL4245 is a configurable dual-voltage-supply translator designed for bi-directional voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA ...
The LVXC4245 is a 24-pin dual-supply, 8-bit configurable voltage interface transceiver suited for PCMCIA and other real time configurable I/O applications. The VCCA pin accepts a 5V supply level. The \"A\" Port is a dedicated 5V port. The VCCB pin accepts a ...
The FXLH42245 is a configurable dual-voltage-supply translator designed for bi-directional voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA ...
The VCX163245 is a dual supply, 16-bit translating transceiver that is designed for 2 way asynchronous communication between busses at different supply voltages by providing true signal translation. The supply rails consist of VCCA, which is a higher potential ...
The FXL5T244 is a configurable dual-voltage-supply translator designed for one-way (unidirectional) voltage translation of signals between two voltage levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. A Inputs and the ...
The FXL2TD245 is a configurable
dual-voltage-supply translator designed for both uni-directional and
bi-directional voltage translation between two logic levels. The device allows
translation between voltages as high as 3.6V to as low as 1.1V. The A Port ...
The VCX164245 is a dual supply, 16-bit translating transceiver that is designed for two way asynchronous communication between busses at different supply voltages by providing true signal translation. The supply rails consist of VCCB, which is the higher ...
GTL2000 22-bit bi-directional low voltage translator,The Gunning Transceiver Logic , Transceiver Voltage Clamps
(GTL-TVC) provide high-speed voltage translation with low
ON-state resistance and minimal propagation delay. The GTL2000
provides 22 NMOS pass ...
GTL2002 2-bit bidirectional low voltage translator,The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide
high-speed voltage translation with low ON-state resistance and minimal propagation
delay. The GTL2002 provides 2 NMOS pass ...
The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide
high-speed voltage translation with low ON-state resistance and minimal propagation
delay. The GTL2003 provides 8 NMOS pass transistors (Sn and Dn) with a common gate
(GREF) and a ...
The GTL2005 is a quad translating transceiver designed for 3.3 V system interface with a
GTL/GTL+ bus.
The direction pin (DIR) allows the part to function as either a GTL-to-TTL sampling
receiver or as a TTL-to-GTL interface.
The GTL2005 LVTTL interface is ...
The GTL2006 is a 13-bit translator to interface between the 3.3 V
LVTTL chip set I/O and the XeonTM processor GTL,/GTL/GTL+ I/O.
The GTL2006 is designed for platform health management in dual
processor applications.
...
The GTL2007 is a customized translator between dual Xeon processors, Platform Health
Management, South Bridge and Power Supply LVTTL and GTL signals.
The GTL2007 is derived from the GTL2006 with an enable function added that disables
the error output to the ...
The GTL2008 is a customized translator between dual Xeon processors, Platform Health
Management, South Bridge and Power Supply LVTTL and GTL signals.
Functionally and footprint identical to the GTL2007, the GTL2008 LVTTL and GTL outputs
were changed to put ...
The Gunning Transceiver Logic - Transceiver Voltage Clamps
(GTL-TVC) provide high-speed voltage translation with low
ON-state resistance and minimal propagation delay. The GTL2010
provides 10 NMOS pass transistors (Sn and Dn) with a common
gate (GREF) and ...
The GTL2012 is a 2-bit translating transceiver designed for 3.3 V system interface with a
GTL-/GTL/GTL+ bus.
The direction pin (DIR) allows the part to function as either a GTL-to-LVTTL sampling
receiver or as an LVTTL-to-GTL interface.
The GTL2012 LVTTL ...
The GTL2014 is a 4-bit translating transceiver designed for 3.3 V LVTTL system interface
with a GTL-/GTL/GTL+ bus.
The direction pin allows the part to function as either a GTL to LVTTL sampling receiver or
as a LVTTL to GTL interface.
The GTL2014 LVTTL ...
The GTL2018 is an octal translating transceiver designed for 3.3 V LVTTL system
interface with a GTL-/GTL/GTL+ bus.
The direction pin (DIR) allows the part to function as either a GTL-to-LVTTL sampling
receiver or as an LVTTL-to-GTL interface.
The GTL2018 ...
The GTL2107 is a customized translator between dual Xeon processors,
GTL-/GTL/GTL+ I/O and the Platform Health Management, South Bridge and Power
Supply 3.3 V LVTTL and GTL signals.
...
HEF4104B MSI Quadruple low-to-high voltage translator with 3-state outputs,The HEF4104B quadruple low voltage to high voltage translator with 3-state outputs provides the capability of interfacing low voltage circuits to high voltage circuits such as low ...
PTN3310/PTN3311 High-speed serial logic translators,The High-Speed Serial Logic Translator provides a point solution
that addresses the various interface logic requirements of Optical
Transceiver Modules. The product offers a compact translation
between ...
The LTC1555/LTC1556 provide power conversion and level shifting needed for 3V GSM cellular telephones to interface with either 3V or 5V Subscriber Identity Modules (SIMs). These parts contain a charge pump DC/DC converter that delivers a regulated 5V to the ...
The LTC1555L provides power conversion and level shifting needed for low voltage GSM cellular telephones to interface with either 3V or 5V Subscriber Identity Modules (SIMs). The part contains a patented buck/boost charge pump DC/DC converter* that delivers a ...
The LTC1555L-1.8 provides power conversion and level shifting needed for low voltage GSM and WCDMA cellular telephones to interface with either 1.8V, 3V or 5V subscriber identity modules (SIMs). The part contains a patented buck/boost charge pump DC/DC ...
The LTC1555/LTC1556 provide power conversion and level shifting needed for 3V GSM cellular telephones to interface with either 3V or 5V Subscriber Identity Modules (SIMs). These parts contain a charge pump DC/DC converter that delivers a regulated 5V to the ...
The LTC4555 provides power conversion and signal level shifting needed for low voltage 2.5G and 3G cellular telephones to interface with 1.8V or 3V subscriber identity modules (SIMs). The part meets all type approval requirements for 1.8V and 3V SIMs and smart ...
The ST1G3234 is a dual supply low voltage
CMOS 1-Bit bus buffer level translator fabricated
with sub-micron silicon gate and five-layer metal
2
wiring C MOS technology. Designed for use as an
interface between a 3.3V bus and a 2.5V or 1.8V
bus in a ...
The ST1G3234B is a dual supply low voltage
CMOS 1-bit bus buffer level translator fabricated
with sub-micron silicon gate and five-layer metal
2
wiring C MOS technology. Designed for use as an
interface between a 3.3 V bus and a 2.5 V or
1.8 V bus ...
The ST1G3236 is a dual supply low voltage
CMOS 1-bit bus Transceiver fabricated with sub-
micron silicon gate and five-layer metal wiring
C2MOS technology. Designed for use as an
interface between a 3.3V bus and a 2.5V or 1.2V
bus in mixed supply ...
The ST2329 is a 2-bit dual supply level translator
which provides the level shifting capability to allow
data transfer in a multi-voltage system. Externally
applied voltages, V and V , set the logic levels
CC L
on either side of the device. It ...
The ST2349 is a 4-bit dual supply level translator
which provides the level shifting capability to allow
data transfer in a multi-voltage system. Externally
applied voltages, V and V , set the logic levels
CC L
on either side of the device. It ...
