The ADA4937 is a low noise, ultralow distortion, high speed differential amplifier. It is an ideal choice for driving high performance ADCs with resolutions up to 16 bits from dc to 100 MHz. The adjustable level of the output common mode allows the ADA4937 to ...
The AD8375 is a digitally controlled, variable gain, wide bandwidth amplifier that provides precise gain control, high IP3, and low noise figure. The excellent distortion performance and high signal bandwidth make the AD8375 an excellent gain control device ...
The AD8376 is a dual channel, digitally controlled, variable gain wide bandwidth amplifier that provides precise gain control, high IP3, and low noise figure. The excellent distortion performance and high signal bandwidth make the AD8376 an excellent gain ...
The ADA4938 is a low noise, ultralow distortion, high speed differential amplifier. It is an ideal choice for driving high performance ADCs with resolutions up to 16 bits from dc to 27 MHz, or up to 12 bits from dc to 74 MHz. The output common-mode voltage is ...
The AD8599 is a dual, very low noise, low distortion opera- tional amplifier ideal for use as a preamplifier. The low noise of 1 nV/Hz and low harmonic distortion of 105 dB (or better) at audio bandwidths give the AD8599 the wide dynamic range necessary for ...
The AD797 is a very low noise, low distortion operational amplifier ideal for use as a preamplifier. The low noise of 0.9 nV(root)Hz and low total harmonic distortion of -120 dB at audio bandwidths give the AD797 the wide dynamic range necessary for preamps ...
The ADA4899-1 is an ultralow noise (1 nV/Hz) and distortion (<117 dBc @1 MHz) unity-gain stable voltage feedback op amp, the combination of which makes it ideal for 16-bit and 18-bit systems. The ADA4899-1 features a linear, low noise input stage and internal ...
The ADA4841-2 is a unity gain stable, low noise and distortion, rail-to-rail output amplifier that has a quiescent current of 1.5 mA maximum. Despite its low power consumption, this amplifier offers low wideband voltage noise performance of 2.1 nV/Hz and 1.4 ...
The AD8651 and AD8652 are high precision low noise low distortion rail-to-rail CMOS operational amplifiers running at single supply voltage from 2.7V to 5.5V. The single and dual amplifiers are both offered in the 8-Lead SOIC package and the single is ...
The AD8651 and AD8652 are high precision low noise low distortion rail-to-rail CMOS operational amplifiers running at single supply voltage from 2.7V to 5.5V. The single and dual amplifiers are both offered in the 8-Lead SOIC package and the single is ...
The AD8099 is an ultralow noise (0.95nV/Hz) and distortion (-92dBc @ 10MHz) voltage feedback op amp, the combination of which make it ideal for 16- and 18-bit systems. The AD8099 features a new, highly linear, low noise input stage that increases the full ...
The AD8045 is a unity gain stable voltage feedback amplifier with ultralow distortion, low noise, and high slew rate. With a spurious-free dynamic range of -90 dBc @ 20 MHz, the AD8045 is an ideal solution in a variety of applications, including ultrasound, ...
The AD8027 is a high speed amplifier with rail-to-rail input and output that operates on low supply voltages and is optimized for high performance and wide dynamic signal range. The AD8027 has low noise (4.3 nV/Hz, 1.6 pA/Hz) and low distortion (120 dBc @ 1 ...
The AD8028 is a high speed amplifier with rail-to-rail input and output that operates on low supply voltages and is optimized for high performance and wide dynamic signal range. The AD8028 has low noise (4.3 nV/Hz, 1.6 pA/Hz) and low distortion (120 dBc @ ...
The AD8007 is a single high-performance current feedback amplifier with ultra-low distortion and noise. Unlike other high performance amplifiers, it has low price and low quiescent current, allowing it to be used in a wide range of applications. ADIs ...
The AD8008 is a dual high-performance current feedback amplifier with ultra-low distortion and noise. Unlike other high performance amplifiers, it has low price and low quiescent current, allowing it to be used in a wide range of applications. ADIs proprietary ...
The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The ...
The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The ...
The AD8009 is an ultrahigh speed current feedback amplifier with a phenomenal 5,500 V/s slew rate that results in a rise time of 545 ps, making it ideal as a pulse amplifier. The high slew rate reduces the effect of slew rate limiting and results in the ...
The AD9631 and AD9632 are very high speed and wide bandwidth amplifiers. They are an improved performance alternative to the AD9621 and AD9622. The AD9631 is unity gain stable. The AD9632 is stable at gains of two or greater. Utilizing a voltage feedback ...
The AD9631 and AD9632 are very high speed and wide bandwidth amplifiers. They are an improved performance alternative to the AD9621 and AD9622. The AD9631 is unity gain stable. The AD9632 is stable at gains of two or greater. Utilizing a voltage feedback ...
The AD8506 is a dual micropower amplifier featuring rail-to-rail input and output swings while operating from a 1.8 V to 5.5 V single power supply.
Using a novel circuit technology, these low cost amplifiers offer zero crossover distortion (excellent ...
The ISL55190 and ISL55290 are single and dual high speed operational amplifiers featuring low noise, low distortion, and rail-to-rail output drive capability. They are designed to operate with single and dual supplies from +5VDC (2.5VDC) down to +3VDC ...
The HFA1100 is a high-speed, wideband, fast settling current feedback amplifier built with Intersil\'s proprietary complementary bipolar UHF-1 process. It operates with single supply voltages as low as 4.5V (see Application Information section). The ...
The HFA1110 is a unity gain closed loop buffer that achieves -3dB bandwidth of 750MHz, while offering excellent video performance and low distortion. Manufactured on Intersils proprietary complementary bipolar UHF-1 process, the HFA1110 also offers very fast ...
The HFA1112/12A are closed loop Buffers featuring user programmable gain and ultra high speed performance. Manufactured on Intersils proprietary complementary bipolar UHF-1 process, these devices offer a wide -3dB bandwidth of 850MHz, very fast slew rate, ...
The HFA1130 is a high speed wideband current feedback amplifier featuring programmable output limits. Built with Intersils proprietary complementary bipolar UHF-1 process, it is the fastest monolithic amplifier available from any semiconductor manufacturer.
The ISL55191 and ISL55291 are single and dual high speed operational amplifiers featuring low noise, low distortion, and rail-to-rail output drive capability. They are designed to operate with single and dual supplies from +5VDC (2.5VDC) down to +3VDC ...
The ISL55190 and ISL55290 are single and dual high speed operational amplifiers featuring low noise, low distortion, and rail-to-rail output drive capability. They are designed to operate with single and dual supplies from +5VDC (2.5VDC) down to +3VDC ...
The ISL55191 and ISL55291 are single and dual high speed operational amplifiers featuring low noise, low distortion, and rail-to-rail output drive capability. They are designed to operate with single and dual supplies from +5VDC (2.5VDC) down to +3VDC ...
The ISL28190 and ISL28290 are tiny single and dual ultra-low noise, ultra-low distortion operational amplifiers. Fully specified to operated down to +3V single supply. These amplifiers have outputs that swing rail-to-rail, and an input common mode voltage that ...
The ISL28190 and ISL28290 are tiny single and dual ultra-low noise, ultra-low distortion operational amplifiers. Fully specified to operated down to +3V single supply. These amplifiers have outputs that swing rail-to-rail, and an input common mode voltage that ...
The ISL28191 and ISL28291 are tiny single and dual ultra-low noise, ultra-low distortion operational amplifiers. Fully specified to operated down to +3V single supply. These amplifiers have outputs that swing rail-to-rail, and an input common mode voltage that ...
The ISL28191 and ISL28291 are tiny single and dual ultra-low noise, ultra-low distortion operational amplifiers. Fully specified to operated down to +3V single supply. These amplifiers have outputs that swing rail-to-rail, and an input common mode voltage that ...
The ISL55020 is fully differential wideband amplifier designed to drive differential ADCs. This device features a high drive capability of 100mA, low operating quiescent current of 21mA and operates with both single and dual supplies over a range of 4.5V ...
The LT1010 is a fast, unity-gain buffer that can increase the output capability of existing IC op amps by more than an order of magnitude. This easy-to-use part makes fast amplifiers less sensitive to capacitive loading and reduces thermal feedback in ...
The LT1115 is the lowest noise audio operational amplifier available. This ultralow noise performance (0.9nV/rtHz at 1kHz) is combined with high slew rates (>15V/s) and very low distortion specifications. The RIAA circuit shown below using the LT1115 has ...
The LT1806/LT1807 are single/dual low noise rail-to-rail input and output unity-gain stable op amps that feature a 325MHz gain-bandwidth product, a 140V/s slew rate and a 85mA output current. They are optimized for low voltage, high performance signal ...
The LT1806/LT1807 are single/dual low noise rail-to-rail input and output unity-gain stable op amps that feature a 325MHz gain-bandwidth product, a 140V/s slew rate and a 85mA output current. They are optimized for low voltage, high performance signal ...
The LT1809/LT1
58b
810 are single/dual low distortion rail-to-rail input and output op amps with a 350V/s slew rate. These amplifiers have a ,3dB bandwidth of 320MHz at unity-gain, a gain-bandwidth product of 180MHz (AV >/= 10) and an 85mA output current to ...
The LT1809/LT1810 are single/dual low distortion rail-to-rail input and output op amps with a 350V/s slew rate. These amplifiers have a ,3dB bandwidth of 320MHz at unity-gain, a gain-bandwidth product of 180MHz (AV >/= 10) and an 85mA output current to fit the ...
The LT1818/LT1819 are single/dual wide bandwidth, high slew rate,low noise and distortion operational amplifiers with excellent DC performance. The LT1818/LT1819 have been designed for wider bandwidth and slew rate, much lower input offset voltage and lower ...
The LT1818/LT1819 are single/dual wide bandwidth, high slew rate,low noise and distortion operational amplifiers with excellent DC performance. The LT1818/LT1819 have been designed for wider bandwidth and slew rate, much lower input offset voltage and lower ...
The LT1886 is a 200mA minimum output current dual op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily compensated for lower gains. The LT1886 features balanced, high impedance inputs with 4A maximum input ...
The LT1993-10 is a low distortion, low noise Differential Amplifier/ADC driver for use in applications from DC to 700MHz. The LT1993-10 has been designed for ease of use, with minimal support circuitry required. Exceptionally low input-referred noise and low ...
The LT1993-2 is a low distortion, low noise Differential Amplier/ADC driver for use in applications from DC to 800MHz. The LT1993-2 has been designed for ease of use, with minimal support circuitry required. Exceptionally low input-referred noise and low ...
The LT1993-4 is a low distortion, low noise Differential Amplifier/ADC driver for use in applications from DC to 900MHz. The LT1993-4 has been designed for ease of use, with minimal support circuitry required. Exceptionally low input-referred noise and low ...
The LT1994 is a high precision, very low noise, low distortion, fully differential input/output amplifi er optimized for 3V, single supply operation. The LT1994s output common mode voltage is independent of the input common mode voltage, and is adjustable by ...
The LT5514 is a programmable gain amplifier (PGA) with bandwidth extending from low frequency (LF) to 850MHz. It consists of a digitally controlled variable attenuator, followed by a high linearity amplifier. The amplifier is configured with two identical ...
The LT5524 is a programmable gain amplifier (PGA) with bandwidth extending from low frequency (LF) to 540MHz. It consists of a digitally controlled variable attenuator, followed by a high linearity amplifier. Four parallel digital inputs control the gain over ...
The LT6300 is a 500mA minimum output current, dual op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily compensated for lower gains. The extended output swing allows for lower supply rails to reduce system ...
The LT6301 is a 500mA minimum output current, quad op amp with outstanding distortion performance. The amplifiers are gain-of-ten stable, but can be easily compensated for lower gains. The extended output swing allows for lower supply rails to reduce system ...
The LT6402-12 is a low distortion, low noise differential amplier/ADC driver for use in applications from DC to 300MHz. The LT6402-12 has been designed for ease of use, with minimal support circuitry required. Exceptionally low input-referred noise and low ...
The LT6402-20 is a low distortion, low noise differential amplier/ADC driver for use in applications from DC to 300MHz. The LT6402-20 has been designed for ease of use, with minimal support circuitry required. Exceptionally low input-referred noise and low ...
The LT6402-6 is a low distortion, low noise differential amplier/ADC driver for use in applications from DC to 300MHz. The LT6402-6 has been designed for ease of use, with minimal support circuitry required. Exceptionally low input-referred noise and low ...
The LTC6400-20 is a high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose ...
The LTC6400-26 is a high-speed differential amplifier targeted at processing signals from DC to 300MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose ...
The LTC6401-20 is a high-speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose ...
The LTC6401-26 is a high-speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose ...
The LTC6401-8 is a high-speed differential amplifier targeted at processing signals from DC to 140MHz. The part has been specifically designed to drive 12-, 14- and 16-bit ADCs with low noise and low distortion, but can also be used as a general-purpose ...
The MAX4249, MAX4250, MAX4251, MAX4252, MAX4253, MAX4254, MAX4255, MAX4256, MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.4V. They draw 400A of quiescent supply current per amplifier ...
The MAX4249, MAX4250, MAX4251, MAX4252, MAX4253, MAX4254, MAX4255, MAX4256, MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.4V. They draw 400A of quiescent supply current per amplifier ...
The MAX4249, MAX4250, MAX4251, MAX4252, MAX4253, MAX4254, MAX4255, MAX4256, MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.4V. They draw 400A of quiescent supply current per amplifier ...
The MAX4249, MAX4250, MAX4251, MAX4252, MAX4253, MAX4254, MAX4255, MAX4256, MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.4V. They draw 400A of quiescent supply current per amplifier ...
The MAX4249, MAX4250, MAX4251, MAX4252, MAX4253, MAX4254, MAX4255, MAX4256, MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.4V. They draw 400A of quiescent supply current per amplifier ...
The MAX4249, MAX4250, MAX4251, MAX4252, MAX4253, MAX4254, MAX4255, MAX4256, MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.4V. They draw 400A of quiescent supply current per amplifier ...
The MAX4249, MAX4250, MAX4251, MAX4252, MAX4253, MAX4254, MAX4255, MAX4256, MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.4V. They draw 400A of quiescent supply current per amplifier ...
The MAX4249, MAX4250, MAX4251, MAX4252, MAX4253, MAX4254, MAX4255, MAX4256, MAX4257 low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.4V. They draw 400A of quiescent supply current per amplifier ...
The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16-bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain stability and have a small-signal -3dB ...
The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16-bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain stability and have a small-signal -3dB ...
The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16-bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain stability and have a small-signal -3dB ...
The MAX4434/MAX4435 single and MAX4436/MAX4437 dual operational amplifiers feature wide bandwidth, 16-bit settling time in 23ns, and low-noise/low-distortion operation. The MAX4434/MAX4436 are compensated for unity-gain stability and have a small-signal -3dB ...
The MAX4475 MAX4478/MAX4488/MAX4489 wideband,
low-noise, low-distortion operational amplifiers
offer rail-to-rail outputs and single-supply operation
down to 2.7V. They draw 2.2mA of quiescent supply
current per amplifier while featuring ultra-low ...
The MAX4475MAX4478/MAX4488/MAX4489 wideband,
low-noise, low-distortion operational amplifiers
offer rail-to-rail outputs and single-supply operation
down to 2.7V. They draw 2.2mA of quiescent supply
current per amplifier while featuring ultra-low ...
The MAX4475MAX4478/MAX4488/MAX4489 wideband,
low-noise, low-distortion operational amplifiers
offer rail-to-rail outputs and single-supply operation
down to 2.7V. They draw 2.2mA of quiescent supply
current per amplifier while featuring ultra-low ...
The MAX4475MAX4478/MAX4488/MAX4489 wideband,
low-noise, low-distortion operational amplifiers
offer rail-to-rail outputs and single-supply operation
down to 2.7V. They draw 2.2mA of quiescent supply
current per amplifier while featuring ultra-low ...
The MAX4475MAX4478/MAX4488/MAX4489 wideband,
low-noise, low-distortion operational amplifiers
offer rail-to-rail outputs and single-supply operation
down to 2.7V. They draw 2.2mA of quiescent supply
current per amplifier while featuring ultra-low ...
The MAX4475MAX4478/MAX4488/MAX4489 wideband,
low-noise, low-distortion operational amplifiers
offer rail-to-rail outputs and single-supply operation
down to 2.7V. They draw 2.2mA of quiescent supply
current per amplifier while featuring ultra-low ...
The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They ...
The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They ...
The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They ...
The MAX4180 family of current-feedback amplifiers combines high-speed performance, low distortion,and excellent video specifications with ultra-low-power operation in miniature packages. They operate from 2.25V to 5.5V dual supplies, or from a single +5V ...
The MAX4180 family of current-feedback amplifiers combines high-speed performance, low distortion,and excellent video specifications with ultra-low-power operation in miniature packages. They operate from 2.25V to 5.5V dual supplies, or from a single +5V ...
The MAX4180 family of current-feedback amplifiers combines high-speed performance, low distortion,and excellent video specifications with ultra-low-power operation in miniature packages. They operate from 2.25V to 5.5V dual supplies, or from a single +5V ...
The MAX4180 family of current-feedback amplifiers combines high-speed performance, low distortion,and excellent video specifications with ultra-low-power operation in miniature packages. They operate from 2.25V to 5.5V dual supplies, or from a single +5V ...
The MAX4180 family of current-feedback amplifiers combines high-speed performance, low distortion,and excellent video specifications with ultra-low-power operation in miniature packages. They operate from 2.25V to 5.5V dual supplies, or from a single +5V ...
The MAX4180 family of current-feedback amplifiers combines high-speed performance, low distortion,and excellent video specifications with ultra-low-power operation in miniature packages. They operate from 2.25V to 5.5V dual supplies, or from a single +5V ...
The MAX4180 family of current-feedback amplifiers combines high-speed performance, low distortion,and excellent video specifications with ultra-low-power operation in miniature packages. They operate from 2.25V to 5.5V dual supplies, or from a single +5V ...
The MAX4180 family of current-feedback amplifiers combines high-speed performance, low distortion,and excellent video specifications with ultra-low-power operation in miniature packages. They operate from 2.25V to 5.5V dual supplies, or from a single +5V ...
The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a single-ended output. They operate from ...
The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a single-ended output. They operate from ...
The MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270 ultra-low distortion, voltage-feed-back op amps are capable of driving a 100 load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) ...
The MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270 ultra-low distortion, voltage-feed-back op amps are capable of driving a 100 load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) ...
The MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270 ultra-low distortion, voltage-feed-back op amps are capable of driving a 100 load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) ...
The MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270 ultra-low distortion, voltage-feed-back op amps are capable of driving a 100 load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) ...
The MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270 ultra-low distortion, voltage-feed-back op amps are capable of driving a 100 load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) ...
The MAX4265, MAX4266, MAX4267, MAX4268, MAX4269, MAX4270 ultra-low distortion, voltage-feed-back op amps are capable of driving a 100 load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) ...
The NJM2749/ NJM2749A is a Precision dual JFET input operational amplifier which includes low input offset voltage: 0.8mV (typ) / 2.5mV (max) and 6V/C typical offset drift.The NJM2749A is guaranteed 20V/C maximum offset drift to perform a 100% tested.The ...
The LMH6703 is a very wideband, DC coupled monolithic
operational amplifier designed specifically for ultra high reso-
lution video systems as well as wide dynamic range systems
requiring exceptional signal fidelity. Benefiting from Nation-
als current ...