• Product pinout
  • Description
  • TL3116,Ultra-Fast Low-Power Precision Comparators
  • The TL3116 is an ultra-fast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual 5-V supplies. The input common-mode voltage extends to the negative rail for ground sensing applications. It ...
  • LP339,Quad, Low-Power, General Purpose Differential Comparator
  • The LP239, LP339, LP2901 are low-power quadruple differential comparators. Each device consists of four independent voltage comparators designed specifically to operate from a single power supply and typically to draw 60-??A drain current over a wide range of ...
  • LM6511,180 Ns 3V Comparator
  • The LM6511 voltage comparator is ideal for analog-digital interface circuitry when only a +3V or +3.3V supply is available. The open-collector output permits signal compatibility with a wide variety of digital families: +5V CMOS, +3V CMOS, TTL and so on. ...
  • LMV393,Dual General Purpose, Low Voltage, Tiny Pack Comparator
  • The LMV393 and LMV339 are low voltage (2.7-5V) versions of the dual and quad comparators, LM393,LM339, which are specified at 5-30V. The LMV331 is the single version, which is available in space saving 5-pin SC70 and 5-pin SOT23 packages. The 5-pin SC70 is ...
  • LM397,Single General Purpose Voltage Comparator
  • The LM397 is a single voltage comparator with an input common mode that includes ground. The LM397 is designed to operate from a single 5V to 30V power supply or a split power supply. Its low supply current is virtually independent of the magnitude of the ...
  • LM393,Low Power Low Offset Voltage Dual Comparator
  • The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. ...
  • LM339,Low Power Low Offset Voltage Quad Comparator
  • The LM139 series consists of four independent precision voltage comparators with an offset voltage specification as low as 2 mV max for all four comparators. These were designed specifically to operate from a single power supply over a wide range of voltages. ...
  • LMV7291,Single 1.8V Power Comparator With Rail-to-Rail Input
  • The LMV7291 is a rail-to-rail input low power comparator, characterized at supply voltage 1.8V, 2.7V and 5.0V. It consumes only 9uA supply current per channel while achieving a 800ns propagation delay.
    The LMV7291 is available in SC70 package. With this ...
  • LMC7211,Tiny CMOS Comparator With Rail-to-Rail Input
  • The LMC7211 is a micropower CMOS comparator available in the space saving SOT23-5 package. This makes the comparator ideal for space and weight critical designs. The LMC7211 is supplied in two offset voltage grades, 5 mV and 15 mV.
    The main benefits of ...
  • LMS33460,3V Under Voltage Detector
  • The LMS33460 is an under voltage detector with a 3.0V threshold and extremely low power consumption. The LMS33460 is specifically designed to accurately monitor power supplies. It is especially suited to battery powered systems where low quiescent current and ...
  • LM239,Single Supply Quad Comparator
  • These comparators LM239 are designed for use in level detection, low-level sensing and memory applications in consumer automotive and industrial electronic applications.
    ...
  • CMP04,Quad Low Power, Precision Comparator
  • Four precision independent comparators CMP04 comprise the CMP04. Performance highlights include a very low offset voltage, low output saturation voltage and high gain in a single supply design. The input voltage range includes ground for single supply ...
  • LT1017,LT1017 - Micropower Dual Comparator
  • The LT1017/LT1018 are general purpose micropower comparators. The LT1017 is optimized for lowest operating power while the LT1018 operates at higher power and higher speed. Both devices can operate from a single 1.1V cell up to 40V. The output stage includes a ...
  • LT1018,LT1018 - Micropower Dual Comparator
  • The LT1017/LT1018 are general purpose micropower comparators. The LT1017 is optimized for lowest operating power while the LT1018 operates at higher power and higher speed. Both devices can operate from a single 1.1V cell up to 40V. The output stage includes a ...
  • LTC1040,LTC1040 - Dual Micropower Comparator
  • The LTC1040 is a monolithic CMOS dual comparator manufactured using Linear Technologys enhanced LTCMOS silicon gate process. Extremely low operating power levels are achieved by internally switching the comparator ON for short periods of time. The CMOS output ...
  • LTC1041,LTC1041 - BANG-BANG Controller
  • The LTC1041 is a monolithic CMOS BANG-BANG controller manufactured using Linear Technologys enhanced LTCMOS silicon gate process. BANG-BANG loops are characterized by turning the control element fully ON or fully OFF to regulate the average value of the ...
  • LTC1042,LTC1042 - Window Comparator
  • The LTC1042 is a monolithic CMOS window comparator manufactured using Linear Technologys enhanced LTCMOS silicon gate process. Two high impedance voltage inputs, CENTER and WIDTH/2, define the middle and width of the comparison window. Whenever the input ...
  • LTC1441,LTC1441 - Ultralow Power Single/Dual Comparator
  • The LTC1441 is an ultralow power dual comparator, featuring less than 5.7A supply current over temperature. The TTL/CMOS outputs both sink and source current.
    The comparators operate from a single 2V to 11V supply or a dual 1V to 5.5V supply. Each ...
  • LTC1540,LTC1540 - Nanopower Comparator With Reference
  • The LTC1540 is an ultralow power, single comparator with built-in reference. The comparators features include less than 0.6A supply current over the commercial temperature range, a 1.182V 2% reference, programmable hysteresis and TTL/CMOS outputs that sink and ...
  • LTC1841,LTC1841 - Ultralow Power Dual Comparators
  • The LTC1841 is an ultralow power dual comparator featuring less than 5.7A supply current over temperature, a 1.182V 1% reference, programmable hysteresis and open-drain outputs that sink current. The reference output can drive a bypass capacitor of up to 0.01F ...
  • LTC1921,LTC1921 - Dual -48V Supply And Fuse Monitor
  • The LTC1921 monitors two independent 48V supplies, including their fuses, and drives up to three optoisolators to indicate status, in accordance with standard backplane specifications. Requiring only three noncritical resistors and optoisolators, the LTC1921 ...
  • LTC6702,LTC6702 - Tiny Micropower, Low Voltage Dual Comparators
  • The LTC6702 is an extremely small dual comparator designed to maximize battery life while providing both speed and low voltage operation in applications where board space is a premium. These comparators operate on supplies between 1.7V and 5.5V, and have a ...
  • LM2903H,Low Power Dual Voltage Comparators
  • This device LM2903H consists of two independent low power voltage comparators designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also have a ...
  • LM139,LOW POWER QUAD VOLTAGE COMPARATOR
  • These devices LM339A,LM239A,LM139A consist of four independent preci- sion voltage comparators with an offset voltage specifications as low as 2mV max for LM339A, LM239A and LM139A. All these comparators were designed specifically to operate from a ...
  • LM193,Low Power Dual Voltage Comparators
  • These devices LM193, LM293, LM393 consist of two independent low voltage comparators designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also ...
  • LM211,Voltage Comparators
  • The LM111, LM211, LM311 are voltage comparators that have low input currents. They are also designed to operate over a wide range of supply voltages: from standard 15V operational amplifier supplies down to the single +5V supply used for IC ...
  • LM2901,Low Power Quad Voltage Comparator
  • This device LM2901 consists of four independent precision voltage comparators. All these comparators are designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. These ...
  • LM2903,Low Power Dual Voltage Comparator
  • This device LM2903 consists of two independent low power voltage comparators designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also have a ...
  • LM393W,Low Power Dual Voltage Comparators
  • These devices LM393W consist of two independent low voltage comparators designed specifically to oper- ate from a single supply over a wide range of volt- ages. Operation from split power supplies is also possible. These comparators LM393W also have a ...
  • TS372,Low Power Dual CMOS Voltage Comparator
  • These devices TS372 consist of two independent preci- sion voltage comparators, designed to operate with single or dual supplies. These differential comparators use the STMicro- electronics silicon lin MOS process giving them an excellent ...
  • TS374,LOW POWER QUAD CMOS VOLTAGE COMPARATOR
  • These devices TS374 consist of four independent preci- sion voltage comparators, designed to operate with single or dual supplies. These differential comparators use the STMicro- electronics silicon lin MOS process giving them an excellent ...
  • TS391,Low Power Single Voltage Comparator
  • Low power TS391 single voltage comparator,These devices consist of a low power voltage comparator designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. This ...