MAX1007 Mobile Radio Analog Controller

The MAX1007 is a multifunctional integrated circuit designed for high-performance mobile Radios It includes one 8-bit Analog-to-digital converter (ADC), and two 7-bit and two 6-bit digital-to-analog converters (DACs) for functions including radio-frequency (RF) power sensing and antenna-diversity selection.
The ADC provides for power sense, receive-signal strength intensity (RSSI) measurements and system supervision. In the power-sense mode, the ADC converts the power-sensing circuitry signal (representing either the transmitted (Tx) or received (Rx) RF power) into a digital code, ensuring optimum Tx power setting and Rx signal analysis. An additional direct input to the ADC provides for system-supervision measurements, such as power-supply voltages, battery voltage, and temperature.
Four DAC blocks typically control DC levels in Radios As part of the Maxim PWT1900 chip set, the two 7-bit DACs control the gain settings and the two 6-bit DACs control the varactor Diodes to tune a TCXO and bias a GaAs Amplifier Each DAC Register and output CAN be updated independently, providing maximum flexibility.
For Antenna diversity, a magnitude-comparison circuit captures and compares two peak signals. A latched logic-comparator output reveals which signal has the largest magnitude. The MAX1007 also includes an on-board Voltage Reference for the ADC and DACs
The MAX1007 offers a high level of signal integrity with minimal power dissipation. Single-supply operation ranges from +2.85V to +3.6V. T 77d o further save power, there are two shutdown modes: standby and total shutdown. Standby is a partial shutdown that keeps the bandgap reference and the 2.4V reference generator active. Total shutdown disables all circuit blocks except the serial Interface reducing supply current to less than 1A.
The MAX1007 is available in a 24-pin SSOP and is specified for commercial and extended temperature ranges.
By Maxim Integrated Products
Part Manufacturer Description Datasheet Samples
MAX1007EAG+T Maxim Integrated Products Analog Circuit, 1 Func, PDSO24, 5.30 X 0.65 MM, SSOP-24
MAX1007CAG+ Maxim Integrated Products Analog Circuit, 1 Func, PDSO24, 5.30 X 0.65 MM, SSOP-24
MAX1007EAG+ Maxim Integrated Products Analog Circuit, 1 Func, PDSO24, 5.30 X 0.65 MM, SSOP-24
MAX1007CAG Maxim Integrated Products Analog Circuit, 1 Func, PDSO24, 5.30 X 0.65 MM, SSOP-24
MAX1007CAG+T Maxim Integrated Products Analog Circuit, 1 Func, PDSO24, 5.30 X 0.65 MM, SSOP-24
MAX1007CAG-T Maxim Integrated Products Analog Circuit, 1 Func, PDSO24, 5.30 X 0.65 MM, SSOP-24
MAX1007EAG-T Maxim Integrated Products Analog Circuit, 1 Func, PDSO24, 5.30 X 0.65 MM, SSOP-24
MAX1007EAG Maxim Integrated Products Analog Circuit, 1 Func, PDSO24, 5.30 X 0.65 MM, SSOP-24
MAX1007 's PackagesMAX1007 's pdf datasheet
MAX1007EAG SSOP
MAX1007EAG-T SSOP




MAX1007 Pinout, Pinouts
MAX1007 pinout,Pin out
This is one package pinout of MAX1007,If you need more pinouts please download MAX1007's pdf datasheet.

MAX1007 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MAX1007 Pb-Free MAX1007 Cross Reference MAX1007 Schematic MAX1007 Distributor
MAX1007 Application Notes MAX1007 RoHS MAX1007 Circuits MAX1007 footprint
Hot categories