MAX1126 Quad, 12-Bit, 40Msps, 1.8V ADC With Serial LVDS Outputs

The MAX1126 quad, 12-bit Analog-to-digital converter (ADC) features fully differential inputs, a pipelined architecture, and digital error correction. This ADC is optimized for low-power, high-dynamic performance for medical imaging, Communications and instrumentation applications. The MAX1126 operates from a 1.7V to 1.9V single supply and consumes only 563mW while delivering a 69.9dB signal-to-noise ratio (SNR) at a 5.3MHz input frequency. In addition to low operating power, the MAX1126 features an 813A power-down mode for idle periods.
An internal 1.24V precision bandgap reference sets the ADC's full-scale range. A flexible reference structure allows the use of an external reference for applications requiring increased accuracy or a different input voltage range.
A single-ended Clock controls the conversion process. An internal duty-cycle equalizer allows for wide variations in input-clock duty cycle. An on-chip phase-locked loop (PLL) generates the high-speed serial low-voltage differential signaling (LVDS) Clock
The MAX1126 provides serial LVDs outputs for data, Clock and frame alignment signals. The output data is presented in two's complement or binary format.
Refer to the MAX1127 data sheet for a pin-compatible 65Msps version of the MAX1126.
The MAX1126 is available in a small, 10mm x 10mm x 0.9mm, 68-pin QFN package with exposed paddle and is specified for the extended industrial (-40C to +85C) temperature range.
By Maxim Integrated Products