MAX13080E, MAX13081E, MAX13082E, MAX13083E, MAX13084E, MAX13085E, MAX13086E, MAX13087E, MAX13088E, MAX13089E +5.0V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

The MAX13080E MAX13081E MAX13082E MAX13083E MAX13084E MAX13085E MAX13086E MAX13087E MAX13088E MAX13089E +5.0V, 15kV ESD-protected, RS-485 RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic-high if all transmitters on a terminated bus are disabled (high impedance). The MAX13080E MAX13081E MAX13082E MAX13083E MAX13084E MAX13085E MAX13086E MAX13087E MAX13088E MAX13089E include a hot-swap capability to eliminate false transitions on the bus during power-up or hot insertion.
The MAX13080E MAX13081E MAX13082E feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 250kbps. The MAX13083E MAX13084E MAX13085E also feature slew-rate-limited drivers but allow transmit speeds up to 500kbps. The MAX13086E MAX13087E MAX13088E driver slew rates are not limited, making transmit speeds up to 16Mbps possible. The MAX13089E slew rate is pin selectable for 250kbps, 500kbps, and 16Mbps.
The MAX13082E MAX13085E MAX13088E are intended for half-duplex Communications and the MAX13080E MAX13081E MAX13083E MAX13084E MAX13086E MAX13087E are intended for full-duplex Communications The MAX13089E is selectable for half-duplex or full-duplex operation. It also features independently programmable receiver and transmitter output phase through separate pins.
The MAX13080E MAX13089E transceivers draw 1.2mA of supply current when unloaded or when fully loaded with the drivers disabled. All devices have a 1/8-unit load receiver input impedance, allowing up to 256 transceivers on the bus.
The MAX13080E MAX13083E MAX13086E MAX13089E are available in 14-pin PDIP and 14-pin SO packages. The MAX13081E MAX13082E MAX13084E MAX13085E MAX13087E MAX13088E are available in 8-pin PDIP and 8-pin SO packages. The devices operate over the commercial, extended, and automotive temperature ranges.
By Maxim Integrated Products
MAX13087E 's PackagesMAX13087E 's pdf datasheet



MAX13087E Pinout, Pinouts
MAX13087E pinout,Pin out
This is one package pinout of MAX13087E,If you need more pinouts please download MAX13087E's pdf datasheet.

MAX13087E Application circuits
MAX13087E circuits
This is one application circuit of MAX13087E,If you need more circuits,please download MAX13087E's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX13087E Pb-Free MAX13087E Cross Reference MAX13087E Schematic MAX13087E Distributor
MAX13087E Application Notes MAX13087E RoHS MAX13087E Circuits MAX13087E footprint
Hot categories