MAX1430 15-Bit, 100Msps ADC With -76.8dBFS Noise Floor For IF Applications
The MAX1430 is a 5V, high-speed, high-performance Analog-to-digital converter (ADC) featuring a fully differential wideband track-and-hold (T/H) and a 15-bit converter core. The MAX1430 is optimized for multichannel, multimode receivers, which require the ADC to meet very stringent dynamic performance requirements. With a noise floor of -76.8dBFS, the MAX1430 allows for the design of receivers with superior sensitivity. The MAX1430 achieves two-tone, spurious-free dynamic range (SFDR) of -92dBc for input Tones of 69MHz and 71MHz. Its excellent signal-to-noise ratio (SNR) of 72.8dB and single-tone SFDR performance (SFDR1/SFDR2) of 86dBc/83dBc at fIN = 70MHz and a sampling rate of 100Msps make this part ideal for high-performance digital receivers. The MAX1430 operates from an Analog 5V and a digital 3V supply, features a 2.2VP-P full-scale input range, and allows for a sampling speed of up to 100Msps. The input T/H operates with a -1dB full-power bandwidth of 350MHz.The MAX1430 features parallel, CMOS-compatible outputs in two's-complement format. To enable the Interface with a wide range of Logic devices, this ADC provides a separate output driver power-supply range of 2.3V to 3.5V. The MAX1430 is manufactured in an 8mm x 8mm, 56-pin thin QFN package with exposed paddle (EP) for low thermal resistance, and is specified for the extended industrial (-40C to +85C) temperature range. Note that IF parts MAX1418 MAX1428 and MAX1430 (see Pin-Compatible Higher/Lower Speed Versions Selection table) are recommended for applications that require high dynamic performance for input frequencies greater than fCLK/3. Unlike its baseband counterpart MAX1429 the MAX1430 is optimized for input frequencies greater than fCLK/3.
By Maxim Integrated Products
|MAX1430ETN+TD||Maxim Integrated Products||IC 1-CH 15-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, QCC56, 8 X 8 MM, 0.8 MM HEIGHT, ROHS COMPLIANT, MO-220WLLD-5, QFN-56, Analog to Digital Converter|
|MAX1430ETN-D||Maxim Integrated Products||IC 1-CH 15-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, QCC56, 8 X 8 MM, 0.8 MM HEIGHT, MO-220WLLD-5, QFN-56, Analog to Digital Converter|
|MAX1430ETN+D||Maxim Integrated Products||IC 1-CH 15-BIT PROPRIETARY METHOD ADC, PARALLEL ACCESS, QCC56, 8 X 8 MM, 0.8 MM HEIGHT, ROHS COMPLIANT, MO-220WLLD-5, QFN-56, Analog to Digital Converter|
|MAX1430 Pb-Free||MAX1430 Cross Reference||MAX1430 Schematic||MAX1430 Distributor|
|MAX1430 Application Notes||MAX1430 RoHS||MAX1430 Circuits||MAX1430 footprint|