180ma, 1x/2x, White Led Charge Pump In 3mm X 3mm Tdfn Integrated Products

The MAX1574 Charge Pump drives up to three white LEDs with regulated constant current for uniform intensity. By utilizing adaptive 1x/2x charge-pump modes and very-low-dropout current Regulators it achieves 180mA output drive capability and high efficiency over the 1-cell lithium-battery input voltage range. Fixed-frequency (1MHz) switching allows for tiny external components, and the regulation scheme is optimized to ensure low EMI and low input ripple. The MAX1574 uses an external resistor to set the full- scale 100% LED current. An enable input (EN) is used for simple on/off control or CAN be pulsed repeatedly to set lower LED current in multiple steps down to 5%. Once the desired brightness is set, the MAX1574 maintains con- stant LED current as long as EN is kept high. If EN is kept low for more than 2ms, the MAX1574 enters shutdown. The MAX1574 is available in a 10-pin 3mm x 3mm TDFN package (0.8mm max height). By Maxim Integrated Products
MAX1574 's PackagesMAX1574 's pdf datasheet

MAX1574 Pinout, Pinouts
MAX1574 pinout,Pin out
This is one package pinout of MAX1574,If you need more pinouts please download MAX1574's pdf datasheet.

MAX1574 Application circuits
MAX1574 circuits
This is one application circuit of MAX1574,If you need more circuits,please download MAX1574's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX1574 Pb-Free MAX1574 Cross Reference MAX1574 Schematic MAX1574 Distributor
MAX1574 Application Notes MAX1574 RoHS MAX1574 Circuits MAX1574 footprint