MAX16031, MAX16032 EEPROM-Based System Monitors With Nonvolatile Fault Memory

The MAX16031 MAX16032 EEPROM-configurable system monitors feature an integrated 10-bit Analog-to-digital converter (ADC) designed to monitor voltages, temperatures, and current in complex systems. These EEPROM-configurable devices allow enormous flexibility in selecting operating ranges, upper and lower limits, fault output configuration, and operating modes with the capability of storing these values within the device.
The MAX16031 monitors up to eight voltages, three temperatures (one internal/two external remote temperature diodes), and a single current. The MAX16032 monitors up to six voltages and two temperatures (one internal/one remote temperature diode). Each of these monitored parameters is muxed into the ADC and written to its respective Register that CAN be read back through the SMBus" and JTAG 56b Interface
Measured values are compared to the user-configurable upper and lower limits. For voltage measurements, there are two undervoltage and two overvoltage limits. For current and temperature, there are two sets of upper limits. Whenever the measured value is outside its limits, an alert signal is generated to notify the processor. Independent outputs are available for overcurrent, overtemperature, and undervoltage/overvoltage that are configured to assert on assigned channels. There are also undedicated fault outputs that are configured to offer a secondary limit for temperature, current, or voltage fault or provide a separate overvoltage output.
During a major fault event, such as a system shutdown, the MAX16031 MAX16032 automatically copy the internal ADC Registers into the nonvolatile EEPROM Registers that then are read back for diagnostic purposes.
The MAX16031 MAX16032 offer additional GPIOs that are used for voltage sequencing, additional fault outputs, a manual reset input, or read/write Logic levels. A separate current-sense Amplifier with an independent output allows for fast shutoff during overcurrent conditions. The MAX16031 MAX16032 are available in a 7mm x 7mm TQFN package and are fully specified from -40C to +85C.
By Maxim Integrated Products
MAX16031 's PackagesMAX16031 's pdf datasheet
MAX16031ETM QFN
MAX16031ETMT QFN




MAX16031 Pinout, Pinouts
MAX16031 pinout,Pin out
This is one package pinout of MAX16031,If you need more pinouts please download MAX16031's pdf datasheet.

MAX16031 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MAX16031 Pb-Free MAX16031 Cross Reference MAX16031 Schematic MAX16031 Distributor
MAX16031 Application Notes MAX16031 RoHS MAX16031 Circuits MAX16031 footprint