MAX1608, MAX1609 Octal, SMBus-to-Parallel I/O Expanders
The MAX1608 MAX1609 provide remote input/output (I/O) expansion through an SMBus 2-wire serial Interface Each device has eight High-Voltage open-drain outputs that double as TTL-level Logic inputs, providing continuous bidirectional capabilities. The open-drain outputs tailor the MAX1608 MAX1609 for use in load-switching and other level-shifting applications as well as general-purpose I/O applications.
Two complete sets of Registers allow the device and its outputs to be toggled between two states using the active-low SMBSUS input, without the inherent latency of reprogramming outputs over the serial bus. The eight I/O lines are continuously monitored and CAN be used as inputs. Each line CAN generate asynchronous maskable interrupts on the falling edge, the rising edge, or both edges.
For load-switching applications, the MAX1608 is designed to drive N-Channel MOSFETs and its outputs are low upon power-up; the MAX1609 is designed to drive P-Channel MOSFETs and its I/Os are high impedance upon power-up. Other features of both devices include thermal-overload and output-overcurrent protection, ultra-low supply current, and a wide +2.7V to +5.5V supply range. The MAX1608 MAX1609 are available in space-saving 16-pin QSOP packages.
By Maxim Integrated Products
|MAX1608 Pb-Free||MAX1608 Cross Reference||MAX1608 Schematic||MAX1608 Distributor|
|MAX1608 Application Notes||MAX1608 RoHS||MAX1608 Circuits||MAX1608 footprint|