MAX17003A, MAX17004A - NEW! - High-Efficiency, Quad Output, Main Power-Supply Controllers For Notebook Computers

The MAX17003A MAX17004A are dual Step-down switch-mode, power-supply (SMPS) controllers with synchronous rectification, intended for main 5V/3.3V power generation in battery-powered systems. Fixed-frequency operation with optimal interleaving minimizes input ripple current from the lowest input voltages up to the 26V maximum input. Optimal 40/60 interleaving allows the input voltage to go down to 8.3V before duty-cycle overlap occurs, compared to 180 out-of-phase Regulators where the duty-cycle overlap occurs when the input drops be low 10V.
Output current sensing provides peak current-limit protection, using either an accurate sense resistor or using lossless inductor DCR current sensing. A low-noise mode maintains high light-load efficiency while keeping the switching frequency out of the audible range.
An internal, fixed 5V, 100mA linear Regulator powers up the MAX17003A MAX17004A and their Gate drivers, as well as external keep-alive loads. When the main PWM Regulator is in regulation, an Automatic bootstrap Switch bypasses the internal linear Regulator providing current up to 200mA. An additional adjustable linear-regulator driver with an external PNP Transistor CAN be used with a secondary winding to provide a 12V supply, or powered directly from the main outputs to generate low-voltage outputs as low as 1V.
Independent enable controls and power-good signals allow flexible power sequencing. Voltage soft-start gradually ramps up the output voltage and reduces inrush current, while soft-discharge gradually decrease the output voltage, preventing negative voltage dips. The MAX17003A MAX17004A feature output undervoltage and thermal-fault protection. The MAX17003A also includes output overvoltage-fault protection.
The MAX17003A MAX17004A are available in a 32-pin, 5mm x 5mm thin QFN package. The exposed backside pad improves thermal characteristics for demanding linear keep-alive applications.
By Maxim Integrated Products
Part Manufacturer Description Datasheet Samples
MAX17003AETJ+ Maxim Integrated Products Dual Switching Controller, Current-mode, 3.3A, 575kHz Switching Freq-Max, BICMOS, 5 X 5 MM, 0.80 MM HEIGHT, LEAD FREE, MO-220WHHD-2, QFN-32
MAX17003A 's PackagesMAX17003A 's pdf datasheet

MAX17003A Pinout, Pinouts
MAX17003A pinout,Pin out
This is one package pinout of MAX17003A,If you need more pinouts please download MAX17003A's pdf datasheet.

MAX17003A Application circuits
MAX17003A circuits
This is one application circuit of MAX17003A,If you need more circuits,please download MAX17003A's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX17003A Pb-Free MAX17003A Cross Reference MAX17003A Schematic MAX17003A Distributor
MAX17003A Application Notes MAX17003A RoHS MAX17003A Circuits MAX17003A footprint