MAX19711 10-Bit, 11Msps, Full-Duplex, Analog Front-EndThe MAX19711 is an ultra-low-power, highly integrated
Mixed-Signal Analog front-end (AFE) ideal for CDMA Communication applications operating in full-duplex
(FD) mode. Optimized for high dynamic performance
and ultra-low power, the device integrates a dual 10-bit,
11Msps receive (Rx) ADC; dual 10-bit, 11Msps transmit
(Tx) DAC with CDMA baseband filters; three fast-settling
12-bit aux-DAC channels for ancillary Rf Front-End control;
and a 10-bit, 333ksps housekeeping aux-ADC. The
typical operating power in FD mode is 37.5mW/42.7mW
at a 4.915MHz/11MHz Clock frequency.
The Rx ADCs feature 54.8dB SNR and 74.2dBc SFDR at
1.875MHz input frequency with an 11MHz Clock frequency.
The Analog I/Q input Amplifiers are fully differential
and accept 1.024VP-P full-scale signals. Typical I/Q
channel matching is 0.01 phase and &plu
4f4
smn;0.01dB gain.
The Tx DACs with CDMA lowpass Filters feature -3dB
cutoff frequency of 1.3MHz and > 64dBc stopband
rejection at fIMAGE = 4.285MHz at fCLK = 4.915MHz. The
Analog I-Q full-scale output voltage range is selectable at
410mV or 500mV differential. The output DC common-mode
voltage is selectable from 0.86V to 1.36V. The I/Q
channel offset is adjustable to optimize Radio lineup sideband Carrier suppression. Typical I-Q channel matching
is 0.03dB gain and 0.07 phase.
Two independent 10-bit parallel, high-speed digital
buses used by the Rx ADC and Tx DAC allow full-duplex
operation for frequency-division duplex applications.
The Rx ADC and Tx DAC CAN be disabled
independently to optimize Power Management A 3-wire
serial Interface controls power-management modes, the
aux-DAC channels, and the aux-ADC channels.
The MAX19711 operates on a single 2.7V to 3.3V
Analog supply and 1.8V to 3.3V digital I/O supply.
The MAX19711 is specified for the extended (-40C to
+85C) temperature range and is available in a 56-pin,
thin QFN package. The Selector Guide at the end of the
data sheet lists other pin-compatible versions in this AFE
family.
4e8
For time-division duplex (TDD) applications, refer
to the MAX19705 MAX19708 AFE family of products.
By Maxim Integrated Products |
|


| MAX19711 Pb-Free | MAX19711 Cross Reference | MAX19711 Schematic | MAX19711 Distributor |
| MAX19711 Application Notes | MAX19711 RoHS | MAX19711 Circuits | MAX19711 footprint |
