MAX200, MAX201, MAX202, MAX203, MAX204, MAX205, MAX206, MAX207, MAX208, MAX209, MAX211, MAX213 +5V, RS-232 Transceivers With 0.1�F External CapacitorsThe MAX200 MAX201 MAX202 MAX203 MAX204 MAX205 MAX206 MAX207 MAX208 MAX209 MAX211 MAX213 transceivers are
designed for RS-232 and V.28 Communication Interfaces
where 12V supplies are not available. On-board
Charge Pumps convert the +5V input to the 10V needed
for RS-232 output levels. The MAX201 and MAX209
operate from +5V and +12V, and contain a +12V to
-12V charge-pump voltage converter.
The MAX200 MAX201 MAX202 MAX203 MAX204 MAX205 MAX206 MAX207 MAX208 MAX209 MAX211 MAX213 drivers and receivers meet all EIA/TIA-232E and CCITT V.28 specifications at a data rate of 20kbps. The drivers maintain the 5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification. The 5W shutdown mode of the MAX200 MAX205 MAX206 and MAX211 conserves energy in battery powered systems. The MAX213 has an active-low shutdown and an active-high receiver enable control. Two receivers of the MAX213 are active, allowing ring indicator (RI) to be monitored easily using only 75W power. The MAX211 and MAX213 are available in a 28-pin wide small-outline (SO) package and a 28-pin shrink small-outline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is now available in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components, and are recommended for applications with limited ircuit board space. By Maxim Integrated Products |
|
MAX200 Pb-Free | MAX200 Cross Reference | MAX200 Schematic | MAX200 Distributor |
MAX200 Application Notes | MAX200 RoHS | MAX200 Circuits | MAX200 footprint |