MAX2390, MAX2391, MAX2392, MAX2393, MAX2396, MAX2400 W-CDMA/W-TDD/TD-SCDMA Zero-IF Receivers

The MAX2390-MAX2393 MAX2396 MAX2400 (referred to as the MAX2390 family) fully integrated direct-conversion receiver ICs are designed for W-CDMA and TDSCDMA applications. The MAX2390 family of receiver ICs have over 90dB of dynamic gain control, and typical noise figure of 2.7dB referred to LNA input. Each receiver consists of an ultralow- current low-noise Amplifier (LNA) with on-chip output matching and a two-step gain control. The zero-IF Demodulator has a differential circuit topology for minimum LO leakage to receiver's input. The channel selectivity is done completely in the baseband section of the receiver with an on-chip lowpass Filter The AGC section has over 50dB of gain-control range. LO quadrature generation is done on-chip through a divide-by-2 prescaler. The DC offset cancellation in the I/Q baseband channels is done fully on-chip using a DC servo loop. To quickly correct for large DC offset transients in minimal time, very fast settling time is obtained by optimization of the DC-offset-cancellation circuit's time constant. By Maxim Integrated Products
MAX2393 's PackagesMAX2393 's pdf datasheet
MAX2393EGI-T QFN
MAX2393EGI QFN




MAX2393 Pinout will be updated soon..., now you can download the pdf datasheet to check the pinouts !
MAX2393 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MAX2393 Pb-Free MAX2393 Cross Reference MAX2393 Schematic MAX2393 Distributor
MAX2393 Application Notes MAX2393 RoHS MAX2393 Circuits MAX2393 footprint