MAX2820, MAX2820A, MAX2821, MAX2821A 2.4GHz 802.11b Zero-IF Transceivers
The MAX2820 MAX2820A and MAX2821 MAX2821A single-chip zero-IF transceivers are designed for the 802.11b (11Mbps) applications operating in the 2.4GHz to 2.5GHz ISM band. The transceivers are nearly identical, except the MAX2821 and MAX2821A also provide a low-power shutdown mode and an Analog Voltage Reference output. The MAX2820A MAX2821A are cost-reduced versions, virtually identical in pinout and performance to the MAX2820 MAX2821. The transceivers include all the circuitry required to implement an 802.11b RF-to-baseband transceiver solution, providing a fully integrated receive path, transmit path, VCO frequency synthesis, and baseband/control Interface Only a PA, RF Switch RF BPF, and a small number of passive components are needed to form the complete Radio front-end solution.
The ICs eliminate the need for external IF and baseband Filters by utilizing a direct-conversion Radio architecture and monolithic baseband Filters for both receiver and transmitter. They are specifically optimized for 802.11b (11Mbps CCK) applications. The baseband filtering and Rx and Tx signal paths support the CCK modulation scheme for BER = 10-5 at the required sensitivity levels.
The devices are suitable for the full range of 802.11b data rates (1Mbps, 2Mbps, 5.5Mbps, and 11Mbps) and also the higher-rate 22Mbps PBCC standard. The MAX2820 and MAX2821 are available in a 7mm x 7mm 48-lead QFN package. The MAX2820 MAX2821 MAX2820A and MAX2821A are available in a 48-lead thin QFN package.
By Maxim Integrated Products
|MAX2821 Pb-Free||MAX2821 Cross Reference||MAX2821 Schematic||MAX2821 Distributor|
|MAX2821 Application Notes||MAX2821 RoHS||MAX2821 Circuits||MAX2821 footprint|