MAX3050, MAX3057 ±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceivers

The MAX3050 MAX3057 Interface between the CAN protocol controller and the physical wires of the bus lines in a controller area network (CAN). They are primarily intended for automotive systems requiring data rates up to 2Mbps and feature 80V fault protection against short circuits in High-Voltage power buses. They provide differential transmit capability to the bus and differential receive capability to the CAN controller.
The MAX3050 MAX3057 have four modes of operation: high speed, slope control, standby, and shutdown. High-speed mode allows data rates up to 2Mbps. In slope-control mode, data rates are 40kbps to 500kbps, so the effects of EMI are reduced, and unshielded twisted or parallel cable CAN be used. In standby mode, the transmitters are shut off and the receivers are put into low-current mode. In shutdown mode, the transmitter and receiver are switched off.
The MAX3050 has an AutoShutdown function that puts the device into a 15A shutdown mode when the bus or CAN controller is inactive for 4ms or longer.
The MAX3050 MAX3057 are available in an 8-pin SO package and are specified for operation from -40C to +125C.
By Maxim Integrated Products
MAX3050 's PackagesMAX3050 's pdf datasheet

MAX3050 Pinout, Pinouts
MAX3050 pinout,Pin out
This is one package pinout of MAX3050,If you need more pinouts please download MAX3050's pdf datasheet.

MAX3050 Application circuits
MAX3050 circuits
This is one application circuit of MAX3050,If you need more circuits,please download MAX3050's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX3050 Pb-Free MAX3050 Cross Reference MAX3050 Schematic MAX3050 Distributor
MAX3050 Application Notes MAX3050 RoHS MAX3050 Circuits MAX3050 footprint
Hot categories