MAX3053 ±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver

The MAX3053 Interfaces between the Control Area Network (CAN) protocol controller and the physical wires of the bus lines in a CAN It is primarily intended for industrial systems requiring data rates up to 2Mbps and features 80V fault protection against shorts to High-Voltage power buses. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller.
The MAX3053 has three different modes of operation: high-speed, slope control, and shutdown. High-speed mode allows data rates up to 2Mbps. In slope control mode, data rates are between 40kbps and 500kbps so the effects of EMI are reduced and unshielded twisted or parallel cable may be used. In shutdown mode, the transmitter is switched off, and the receiver is switched to a low-current mode.
An AutoShutdown" function puts the device in 15A shutdown mode when the bus or CAN controller is inactive for 47ms or greater.
The MAX3053 is available in an 8-pin SO package and is specified for -40C to +125C operation.
By Maxim Integrated Products
MAX3053 's PackagesMAX3053 's pdf datasheet

MAX3053 Pinout, Pinouts
MAX3053 pinout,Pin out
This is one package pinout of MAX3053,If you need more pinouts please download MAX3053's pdf datasheet.

MAX3053 Application circuits
MAX3053 circuits
This is one application circuit of MAX3053,If you need more circuits,please download MAX3053's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX3053 Pb-Free MAX3053 Cross Reference MAX3053 Schematic MAX3053 Distributor
MAX3053 Application Notes MAX3053 RoHS MAX3053 Circuits MAX3053 footprint