MAX3058, MAX3059 5V, 1Mbps, Low Supply Current CAN Transceivers

The MAX3058 MAX3059 Interface between the controller area network (CAN) protocol controller and the physical wires of the bus lines in a CAN They are primarily intended for printer and telecom Backplane applications requiring data rates up to 1Mbps. These devices provide differential transmit capability to the bus and differential receive capability to the CAN controller.
The MAX3058 output common-mode range is from -7V to +12V. The MAX3059 output common-mode range is from 0V to VCC. The MAX3059 contains an internal Switch termination resistor that makes it ideal for JetLink applications.
The MAX3058 features four different modes of operation: high speed, slope control, standby, and shutdown. The MAX3059 features three different modes of operation: high speed, slope control, and shutdown. High-speed mode allows data rates up to 1Mbps. In slope-control mode, the slew rate may be optimized for data rates up to 500kbps, so the effects of EMI are reduced, and unshielded twisted or parallel cable CAN be used. In standby mode, the transmitters are shut off and the receivers are put into low-current mode. In shutdown mode, the transmitter and receiver are switched off.
The MAX3058 MAX3059 are available in an 8-pin SO package and are specified over the -40C to +125C temperature range.
By Maxim Integrated Products
MAX3058 's PackagesMAX3058 's pdf datasheet

MAX3058 Pinout, Pinouts
MAX3058 pinout,Pin out
This is one package pinout of MAX3058,If you need more pinouts please download MAX3058's pdf datasheet.

MAX3058 Application circuits
MAX3058 circuits
This is one application circuit of MAX3058,If you need more circuits,please download MAX3058's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX3058 Pb-Free MAX3058 Cross Reference MAX3058 Schematic MAX3058 Distributor
MAX3058 Application Notes MAX3058 RoHS MAX3058 Circuits MAX3058 footprint
Hot categories