MAX3349E USB 2.0 Full-Speed Transceiver With UART Multiplexing Mode

The MAX3349E 15kV ESD-protected, USB transceiver provides a full-speed USB Interface to a lower voltage Microprocessor or ASIC The device supports enumeration, suspend, and VBUS detection. A special UART multiplexing mode routes external UART signals (Rx and Tx) to D+ and D-, allowing the use of a shared connector to reduce cost and part count for mobile devices.
The UART Interface allows mobile devices such as PDAs, cellular phones, and digital cameras to use either UART or USB signaling through the same connector. The MAX3349E features a separate UART voltage supply input to support legacy devices using +2.75V signaling. The MAX3349E supports a maximum UART baud rate of 921kbaud.
Upon connection to a USB host, the MAX3349E enters USB mode and provides a full-speed USB 2.0 compliant Interface through VP, VM, RCV, and OE-bar. The MAX3349E features internal series termination resistors on D+ and D-, and an internal 1.5k pullup resistor to D+ to allow the device to logically connect and disconnect from the USB while plugged in. A suspend mode is provided for low-power operation. D+ and D- are protected from electrostatic discharge (ESD) up to 15kV.
The MAX3349E is available in 16-pin TQFN (4mm x 4mm) and 16-bump UCSP (2mm x 2mm) packages, and is specified over the -40C to +85C extended temperature range.
By Maxim Integrated Products
MAX3349E 's PackagesMAX3349E 's pdf datasheet

MAX3349E Pinout, Pinouts
MAX3349E pinout,Pin out
This is one package pinout of MAX3349E,If you need more pinouts please download MAX3349E's pdf datasheet.

MAX3349E Application circuits
MAX3349E circuits
This is one application circuit of MAX3349E,If you need more circuits,please download MAX3349E's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX3349E Pb-Free MAX3349E Cross Reference MAX3349E Schematic MAX3349E Distributor
MAX3349E Application Notes MAX3349E RoHS MAX3349E Circuits MAX3349E footprint
Hot categories