MAX3610 Low-Jitter 106.25MHz/212.5MHz Fibre-Channel Clock Generator

The MAX3610 is a low-jitter, high-performance, dual-rate Clock Generator optimized for 1Gbps/2Gbps/4Gbps Fibre-Channel applications. When connected with an external AT-cut crystal, the device generates a precision Clock output by integrating a crystal Oscillator with Maxim's low-noise phase-locked loop (PLL) providing a low-cost solution. By coupling Maxim's low-noise PLL design featuring a low-jitter generation VCO with an inexpensive fundamental mode crystal, the MAX3610 provides the optimum combination of low cost, flexibility, and high performance.
The MAX3610 output frequency is selectable. When using a 26.5625MHz crystal, the output Clock rate CAN be set to either 106.25MHz or 212.5MHz. When operating at 106.25MHz, the typical phase jitter is 0.7psRMS from 12kHz to 20MHz. The MAX3610A has low-voltage positive-emitter-coupled Logic (LVPECL) Clock output drivers. The MAX3610B has low-voltage differential-signal (LVDS) Clock output drivers. The MAX3610 output drivers CAN also be disabled.
The MAX3610 operates from a single +3.3V supply. The PECL version typically consumes 165mW, while the LVDs version typically consumes 174mW. Both devices are available in die form and have a 0C to +85C operating temperature range.
By Maxim Integrated Products
MAX3610 's PackagesMAX3610 's pdf datasheet
MAX3610AEVKIT
MAX3610BEVKIT
MAX3610AU-D
MAX3610BU-D




MAX3610 Pinout will be updated soon..., now you can download the pdf datasheet to check the pinouts !
MAX3610 Application circuits
MAX3610 circuits
This is one application circuit of MAX3610,If you need more circuits,please download MAX3610's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX3610 Pb-Free MAX3610 Cross Reference MAX3610 Schematic MAX3610 Distributor
MAX3610 Application Notes MAX3610 RoHS MAX3610 Circuits MAX3610 footprint