MAX4144, MAX4145, MAX4146 High-Speed, Low-Distortion, Differential Line Receivers

The MAX4144 MAX4145 MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp Instrumentation Amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They operate from 5V power supplies and are capable of driving a 150 load to 3.7V. The MAX4144 has an internally set closed-loop gain of +2V/V. The MAX4145 is optimized for gains from +1V/V to +10V/V, while the MAX4146 is optimized for gains from +10V/V to +100V/V. The MAX4145 MAX4146 require a single external resistor to set the closed-loop gain.
These Amplifiers use laser-trimmed, matched thin-film resistors to deliver a common-mode rejection (CMR) of up to 90dB at 10MHz. Using current-feedback techniques, the MAX4144 achieves a 130MHz bandwidth and a 1000V/s slew rate. The MAX4145 achieves a bandwidth of 180MHz and a slew rate of 600V/s while operating with a closed-loop gain of +1V/V, and the MAX4146 features a bandwidth of 70MHz and a slew rate of 800V/s with a gain of +10V/V. Excellent differential gain/phase and noise specifications make these Amplifiers ideal for a wide variety of Video and RF signal-processing applications.
For a complete differential transmission link, use the MAX4144 MAX4145 MAX4146 with the MAX4147 differential Line Driver (see the MAX4147 data sheet for more information).
By Maxim Integrated Products
MAX4146 's PackagesMAX4146 's pdf datasheet

MAX4146 Pinout, Pinouts
MAX4146 pinout,Pin out
This is one package pinout of MAX4146,If you need more pinouts please download MAX4146's pdf datasheet.

MAX4146 Application circuits
MAX4146 circuits
This is one application circuit of MAX4146,If you need more circuits,please download MAX4146's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX4146 Pb-Free MAX4146 Cross Reference MAX4146 Schematic MAX4146 Distributor
MAX4146 Application Notes MAX4146 RoHS MAX4146 Circuits MAX4146 footprint