MAX5008 Regulated 5V USB Charge Pump With Programmable Current Limit

The MAX5008 charge-pump Regulator generates a regulated 5V output up to 125mA with a 2.95V to 5.5V input voltage range. The device includes resistor-programmable overcurrent limit. The MAX5008 requires a minimum number of external components for normal operation. The high 1MHz switching frequency allows the use of small surface-mount ceramic capacitors.
The fault-protection circuitry limits the output current when it exceeds the limit set by an external resistor. The output current CAN range from 1mA to 150mA to accommodate circuit requirements. A FAULT-bar output indicates when the device is in current limit or the output is out of regulation.
A low-power shutdown mode reduces supply current to less than 1A and places the output in a high-impedance state. The MAX5008 is offered in a space-saving 10-pin MAX package that is only 1.1mm high.
By Maxim Integrated Products
MAX5008 's PackagesMAX5008 's pdf datasheet
MAX5008CUB uMAX
MAX5008CUB-T uMAX
MAX5008CUBT uMAX




MAX5008 Pinout, Pinouts
MAX5008 pinout,Pin out
This is one package pinout of MAX5008,If you need more pinouts please download MAX5008's pdf datasheet.

MAX5008 Application circuits
MAX5008 circuits
This is one application circuit of MAX5008,If you need more circuits,please download MAX5008's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX5008 Pb-Free MAX5008 Cross Reference MAX5008 Schematic MAX5008 Distributor
MAX5008 Application Notes MAX5008 RoHS MAX5008 Circuits MAX5008 footprint