MAX503 5V, Low-Power, Parallel-Input, Voltage-Output, 10-Bit DAC

The MAX503 is a low-power, 10-bit, voltage-output digital-to-analog converter (DAC) that uses single 5V or dual 5V supplies. This device has an internal Voltage Reference plus an output Buffer Amplifier Operating current is only 250A from a single 5V supply, making it ideal for portable and battery-powered applications. In addition, the shrink small-outline package (SSOP) measures only 0.1 square inches, using less board area than an 8-pin DIP. 10-bit resolution is achieved through laser trimming of the DAC op amp and reference. No further adjustments are necessary.
Internal gain-setting resistors CAN be used to define a DAC output voltage range of 0V to +2.048V, 0V to +4.096V, or 2.048V. Four-quadrant multiplication is possible without the use of external resistors or op amps The parallel Logic inputs are double buffe red and are compatible with 4-bit, 8-bit, and 16-bit Microprocessors For a hardware and software compatible 12-bit upgrade, refer to the MAX530 data sheet. For DACs with similar features but with a serial data Interface refer to the MAX504 MAX515 data sheet.
By Maxim Integrated Products
MAX503 's PackagesMAX503 's pdf datasheet
MAX503CNG PDIP
MAX503ENG PDIP
MAX503CWG SOIC
MAX503CWGT SOIC
MAX503CWG-T SOIC
MAX503EWG SOIC
MAX503EWG-T SOIC
MAX503EWGT SOIC
MAX503CAGT SSOP
MAX503CAG SSOP
MAX503CAG-T SSOP
MAX503EAG-T SSOP
MAX503EAG SSOP
MAX503EAGT SSOP




MAX503 Pinout, Pinouts
MAX503 pinout,Pin out
This is one package pinout of MAX503,If you need more pinouts please download MAX503's pdf datasheet.

MAX503 Application circuits
MAX503 circuits
This is one application circuit of MAX503,If you need more circuits,please download MAX503's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX503 Pb-Free MAX503 Cross Reference MAX503 Schematic MAX503 Distributor
MAX503 Application Notes MAX503 RoHS MAX503 Circuits MAX503 footprint