MAX5075 Push-Pull FET Driver With Integrated Oscillator And Clock Output

The MAX5075 is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated Oscillator for use in telecom module power supplies. The device drives two MOSFETs connected to a center-tapped transformer primary providing secondary-side, isolated, negative or positive voltages. This device features a programmable, accurate, integrated Oscillator with a synchronizing Clock output that synchronizes an external PWM Regulator A single external resistor programs the internal Oscillator frequency from 50kHz to 1.5MHz.
The MAX5075 incorporates a dual MOSFET driver with 3A peak drive currents and 50% duty cycle. The MOSFET driver generates complementary signals to drive external ground-referenced N-Channel MOSFETs
The MAX5075 is available with a Clock output frequency to MOSFET driver frequency ratio of 1x, 2x, and 4x. The MAX5075 is available in a thermally enhanced 8-pin MAX package and is specified over the -40C to +125C operating temperature range.
By Maxim Integrated Products
MAX5075 's PackagesMAX5075 's pdf datasheet
MAX5075AAUA uMAX
MAX5075AAUAT uMAX
MAX5075AAUA-T uMAX
MAX5075BAUA uMAX
MAX5075BAUA-T uMAX
MAX5075CAUA uMAX
MAX5075CAUA-T uMAX




MAX5075 Pinout, Pinouts
MAX5075 pinout,Pin out
This is one package pinout of MAX5075,If you need more pinouts please download MAX5075's pdf datasheet.

MAX5075 Application circuits
MAX5075 circuits
This is one application circuit of MAX5075,If you need more circuits,please download MAX5075's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX5075 Pb-Free MAX5075 Cross Reference MAX5075 Schematic MAX5075 Distributor
MAX5075 Application Notes MAX5075 RoHS MAX5075 Circuits MAX5075 footprint