MAX5109 Nonvolatile, Dual, 8-Bit DACs With 2-Wire Serial Interface

The MAX5109 dual 8-bit digital-to-analog converters (DACs) feature nonvolatile Registers These nonvolatile Registers store the DAC operating modes and output states, allowing the DACs to initialize to specified configurations at power-up. Precision on-chip output Buffers swing Rail-to-Rail and provide 8s settling time. The IC-compatible, 2-wire serial Interface allows for a maximum Clock frequency of 400kHz. The MAX5109 has independent high and low reference inputs allowing maximum output voltage range flexibility. The reference rails accept voltage inputs that range from ground to the positive supply rail. This device operates from a single +2.7V to +5.25V supply and consumes 200A per DAC A software-controlled power-down mode decreases supply current to less than 25A. A software-controlled mute mode sets each DAC or both DACs simultaneously, to their respective REFL_ voltages. The MAX5109 also includes an asynchronous MUTE-bar input, that drives both DAC outputs simultaneously to their respective REFL_ voltages. The MAX5109 is available in a 16-pin QSOP and is specified for operation over the extended (-40C to +85C) temperature range.
By Maxim Integrated Products
MAX5109 's PackagesMAX5109 's pdf datasheet

MAX5109 Pinout, Pinouts
MAX5109 pinout,Pin out
This is one package pinout of MAX5109,If you need more pinouts please download MAX5109's pdf datasheet.

MAX5109 Application circuits
MAX5109 circuits
This is one application circuit of MAX5109,If you need more circuits,please download MAX5109's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX5109 Pb-Free MAX5109 Cross Reference MAX5109 Schematic MAX5109 Distributor
MAX5109 Application Notes MAX5109 RoHS MAX5109 Circuits MAX5109 footprint