MAX5181, MAX5184 10-Bit, 40MHz, Current/Voltage-Output DACsThe MAX5181 is a 10-bit, current-output digital-to-analog
converter (DAC) designed for superior performance
in signal reconstruction or arbitrary waveform generation
applications requiring Analog signal reconstruction
with low distortion and low-power operation. The
MAX5184 provides equal specifications, with on-chip
precision resistors for voltage-output operation. The
MAX5181 MAX5184 are designed for a 10pV-s glitch
operation to minimize unwanted spurious signal components
at the output. An on-board 1.2V bandgap circuit
provides a well-regulated, low-noise reference that
CAN be disabled for external reference operation.
The devices are designed to provide a high level of signal integrity for the least amount of power dissipation. They operate from a single 2.7V to 3.3V supply. Additionally, these DACs have three modes of operation: normal, low-power standby, and full shutdown, which provides the lowest possible power dissipation with a 1A (max) shutdown current. A fast wake-up time (0.5s) from standby mode to full DAC operation facilitates power conservation by activating the DAC only when required. The MAX5181 MAX5184 are available in 24-pin QSOP packages and are specified for the extended (-40C to +85C) temperature range. Additionally, the MAX5184 is also available in a 24-pin thin QFN with exposed paddle (EP) and is specified for the extended (-40C to +85C) temperature range. For lower resolution, 8-bit versions, refer to the MAX5187/MAX5190 data sheet. By Maxim Integrated Products |
|
MAX5181 Pb-Free | MAX5181 Cross Reference | MAX5181 Schematic | MAX5181 Distributor |
MAX5181 Application Notes | MAX5181 RoHS | MAX5181 Circuits | MAX5181 footprint |