MAX5222 Dual, 8-Bit, Voltage-Output, Serial DAC In 8-Pin SOT23

The MAX5222 contains two 8-bit, buffered, voltage-output digital-to-analog converters (DAC A and DAC B) in a small 8-pin SOT23 package. Both DAC outputs CAN source and sink 1mA to within 100mV of ground and VDD. The MAX5222 operates with a single +2.7V to +5.5V supply.
The device uses a 3-wire serial Interface which operates at Clock rates up to 25MHz and is compatible with SPI", QSPI", and MICROWIRE" Interface standards. The serial input Shift register is 16 bits long and consists of 8 bits of DAC input data and 8 bits for DAC selection and shutdown control. DAC Registers CAN be loaded independently or in parallel at the positive edge of active-low CS.
The MAX5222 's ultra-low power consumption and tiny 8-pin SOT23 package make it ideal for portable and battery-powered applications. Supply current is less than 1mA and drops below 1A in shutdown mode. In addition, the reference input is disconnected from the REF pin during shutdown, further reducing the system's total power consumption.
By Maxim Integrated Products
MAX5222 's PackagesMAX5222 's pdf datasheet
MAX5222EKA-TG05 SOT-23
MAX5222EKA SOT-23
MAX5222EKA-T SOT-23
MAX5222EKAT SOT-23




MAX5222 Pinout, Pinouts
MAX5222 pinout,Pin out
This is one package pinout of MAX5222,If you need more pinouts please download MAX5222's pdf datasheet.

MAX5222 Application circuits
MAX5222 circuits
This is one application circuit of MAX5222,If you need more circuits,please download MAX5222's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX5222 Pb-Free MAX5222 Cross Reference MAX5222 Schematic MAX5222 Distributor
MAX5222 Application Notes MAX5222 RoHS MAX5222 Circuits MAX5222 footprint
Hot categories