MAX5590, MAX5591, MAX5592, MAX5593, MAX5594, MAX5595 Buffered, Fast-Settling, Octal, 12/10/8-Bit, Voltage-Output DACsThe MAX5590 MAX5591 MAX5592 MAX5593 MAX5594 MAX5595 octal, 12/10/8-bit, voltage-output
digital-to-analog converters (DACs) offer buffered
outputs and a 3s maximum settling time at the 12-bit
level. The DACs operate from a +2.7V to +5.25V Analog
supply and a separate +1.8V to +5.25V digital supply.
The 20MHz 3-wire serial Interface is compatible with
SPI", QSPI", MICROWIRE", and digital signal
processor (DSP) protocol applications. Multiple devices
CAN share a common serial Interface in direct-access or
daisy-chained configuration. The MAX5590 MAX5591 MAX5592 MAX5593 MAX5594 MAX5595
provide two multifunction, user-programmable, digital
I/O ports. The externally selectable power-up states of
the DAC outputs are either zero scale, midscale, or full
scale. Software-selectable FAST and SLOW settling
modes decrease settling time in FAST mode, or reduce
supply current in SLOW mode.
The MAX5590 MAX5591 are 12-bit DACs the MAX5592 MAX5593 are 10-bit DACs and the MAX5594 MAX5595 are 8-bit DACs The MAX5590 MAX5592 MAX5594 provide unity-gain-configured output Buffers while the MAX5591 MAX5593 MAX5595 provide force-sense-configured output Buffers The MAX5590 MAX5591 MAX5592 MAX5593 MAX5594 MAX5595 are specified over the extended -40C to +85C temperature range, and are available in spacesaving 24-pin and 28-pin TSSOP packages. By Maxim Integrated Products |
|
MAX5595 Pb-Free | MAX5595 Cross Reference | MAX5595 Schematic | MAX5595 Distributor |
MAX5595 Application Notes | MAX5595 RoHS | MAX5595 Circuits | MAX5595 footprint |