MAX5721 10-Bit, Low-Power, Dual, Voltage-Output DAC With Serial Interface

The MAX5721 dual 10-bit, low-power, buffered voltage-output, digital-to-analog converter (DAC) is packaged in a space-saving 8-pin MAX package (5mm x 3mm). The wide supply voltage range of +2.7V to +5.5V and 112A supply current accommodate low-power and low-voltage applications. DAC outputs employ on-chip precision output Amplifiers that swing Rail-to-Rail The MAX5721 's reference input accepts a voltage range from 0 to VDD. In power-down the reference input is high impedance, further reducing the system's total power consumption.
The 20MHz, 3-wire SPI, QSPI, MICROWIRE and DSP-compatible serial Interface saves board space and reduces the complexity of opto- and transformer-isolated applications. The MAX5721 on-chip power-on reset (POR) circuit resets the DAC outputs to zero and loads the output with a 100k resistor to ground. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. The MAX5721 's software-controlled power-down reduces supply current to less than 0.3A and provides software-selectable output loads (1k , 100k , or high impedance) while in power-down. The MAX5721 is specified over the -40C to +125C automotive temperature range
By Maxim Integrated Products
MAX5721 's PackagesMAX5721 's pdf datasheet
MAX5721AUA uMAX
MAX5721AUA-T uMAX
MAX5721AUAT uMAX
MAX5721EUA uMAX
MAX5721EUA-T uMAX
MAX5721EUAT uMAX




MAX5721 Pinout, Pinouts
MAX5721 pinout,Pin out
This is one package pinout of MAX5721,If you need more pinouts please download MAX5721's pdf datasheet.

MAX5721 Application circuits
MAX5721 circuits
This is one application circuit of MAX5721,If you need more circuits,please download MAX5721's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX5721 Pb-Free MAX5721 Cross Reference MAX5721 Schematic MAX5721 Distributor
MAX5721 Application Notes MAX5721 RoHS MAX5721 Circuits MAX5721 footprint
Hot categories