MAX5851 Dual, 8-Bit, 80Msps, Current-Output DACThe MAX5851 dual, 8-bit, 80Msps, digital-to-analog
converter (DAC) provides superior dynamic performance
in wideband Communication systems. The device integrates
two 8-bit DAC cores, and a 1.24V reference. The
converter supports single-ended and differential modes
of operation. The MAX5851 dynamic performance is
maintained over the entire 2.7V to 3.6V power-supply
operating range. The Analog outputs support a -1.0V to
+1.25V compliance voltage.
The MAX5851 CAN also operate in interleave data mode to reduce the I/O pin count. This allows the converter to be updated on a single, 8-bit bus. The MAX5851 features digital control of channel gain matching to within 0.4dB in sixteen 0.05dB steps. Channel matching improves sideband suppression in Analog quadrature modulation applications. The onchip 1.24V bandgap reference includes a control Amplifier that allows external full-scale adjustments of both channels through a single resistor. The internal reference CAN be disabled and an external reference may be applied for high-accuracy applications. The MAX5851 features full-scale current outputs of 2mA to 20mA and operates from a 2.7V to 3.6V single supply. The DAC supports three modes of power-control operation: normal, low-power standby, and complete powerdown. In power-down mode, the operating current is reduced to 1A. The MAX5851 is packaged in a 40-pin thin QFN with exposed paddle (EP) and is specified for the extended (-40C to +85C) temperature range. Pin-compatible, higher speed, and higher resolution versions are also available. Refer to the MAX5852 (8 bit, 165Msps), the MAX5854 (10 bit, 165Msps), and the MAX5853 (10 bit, 80Msps) data sheets for more information. See Table 4. By Maxim Integrated Products |
|
MAX5851 Pb-Free | MAX5851 Cross Reference | MAX5851 Schematic | MAX5851 Distributor |
MAX5851 Application Notes | MAX5851 RoHS | MAX5851 Circuits | MAX5851 footprint |