MAX5852 Dual, 8-Bit, 165Msps, Current-Output DACThe MAX5852 dual, 8-bit, 165Msps digital-to-analog
converter (DAC) provides superior dynamic performance
in wideband Communication systems. The device integrates
two 8-bit DAC cores, and a 1.24V reference. The
MAX5852 supports single-ended and differential modes
of operation. The dynamic performance is maintained
over the entire 2.7V to 3.6V power-supply operating
range. The Analog outputs support a -1.0V to +1.25V
compliance voltage.
The MAX5852 CAN operate in interleaved data mode to reduce the I/O pin count. This allows the converter to be updated on a single, 8-bit bus. The MAX5852 features digital control of channel gain matching to within 0.4dB in sixteen 0.05dB steps. Channel matching improves sideband suppression in Analog quadrature modulation applications. The onchip 1.24V bandgap reference includes a control Amplifier that allows external full-scale adjustments of both channels through a single resistor. The internal reference CAN be disabled and an external reference may be applied for high-accuracy applications. The MAX5852 features full-scale current outputs of 2mA to 20mA and operates from a 2.7V to 3.6V single supply. The DAC supports three modes of power-control operation: normal, low-power standby, and complete power-down. In power-down mode, the operating current is reduced to 1A. The MAX5852 is packaged in a 40-pin thin QFN with exposed paddle (EP) and is specified for the extended (-40C to +85C) temperature range. Pin-compatible, lower speed, and higher resolution versions are also available. Refer to the MAX5853 (10 bit, 80Msps), the MAX5851 (8 bit, 80Msps), and the MAX5854 (10 bit, 165Msps) data sheets for more information. By Maxim Integrated Products |
|
MAX5852 Pb-Free | MAX5852 Cross Reference | MAX5852 Schematic | MAX5852 Distributor |
MAX5852 Application Notes | MAX5852 RoHS | MAX5852 Circuits | MAX5852 footprint |