MAX5856A Dual 8-Bit, 300Msps DAC With 4x/2x/1x Interpolation Filters And PLL

The MAX5856A dual, 8-bit, 300Msps digital-to-analog converter (DAC) provides superior dynamic performance in wideband Communication systems. The MAX5856A integrates two 8-bit DAC cores, 4x/2x/1x programmable digital interpolation Filters phase-lock loop (PLL) Clock multiplier, and a 1.24V reference. The MAX5856A supports single-ended and differential modes of operation. The MAX5856A dynamic performance is maintained over the entire power-supply operating range of 2.7V to 3.3V. The Analog outputs support a compliance voltage of -1.0V to +1.25V.
The 4x/2x/1x programmable interpolation Filters feature excellent passband distortion and noise performance. Interpolating Filters minimize the design complexity of Analog reconstruction Filters while lowering the data bus and the Clock speeds of the digital Interface The PLL multiplier generates all internal synchronized high-speed Clock signals for interpolating Filter operation and DAC core conversion. The internal PLL helps minimize system complexity and lower cost. To reduce the I/O pin count, the DAC CAN also operate in interleave data mode. This allows the MAX5856A to be updated on a single 8-bit bus.
The MAX5856A features digital control of channel gain matching to within 0.4dB in sixteen 0.05dB steps. Channel matching improves sideband suppression in Analog quadrature modulation applications. The on-chip 1.24V bandgap reference includes a control Amplifier that allows external full-scale adjustments of both channels through a single resistor. The internal reference CAN be disabled and an external reference may be applied for high-accuracy applications.
The MAX5856A features full-scale current outputs of 2mA to 20mA and operates from a 2.7V to 3.3V single supply. The DAC supports three modes of power-control operation: normal, low-power standby, and complete power-down. In power-down mode, the operating current is reduced to 1A.
The MAX5856A is packaged in a 48-pin TQFP with exposed paddle (EP) for enhanced thermal dissipation and is specified for the extended (-40C to +85C) operating temperature range.
By Maxim Integrated Products
Part Manufacturer Description Datasheet Samples
MAX5858AEVKIT Maxim Integrated Products Evaluation Kit for the MAX5858A, MAX5858, MAX5856A
MAX5856A 's PackagesMAX5856A 's pdf datasheet

MAX5856A Pinout, Pinouts
MAX5856A pinout,Pin out
This is one package pinout of MAX5856A,If you need more pinouts please download MAX5856A's pdf datasheet.

MAX5856A circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MAX5856A Pb-Free MAX5856A Cross Reference MAX5856A Schematic MAX5856A Distributor
MAX5856A Application Notes MAX5856A RoHS MAX5856A Circuits MAX5856A footprint