MAX660 CMOS Monolithic Voltage Converter
The MAX660 monolithic, charge-pump voltage inverter converts a +1.5V to +5.5V input to a corresponding-1.5V to -5.5V output. Using only two low-costcapacitors, the charge pump's 100mA output replaces Switching Regulators eliminating inductors and their associated cost, size, and EMI Greater than 90% efficiency over most of its load-current range combined with a typical operating current of only 120A provides ideal performance for both battery-powered and board-level voltage conversion applications. The MAX660 CAN also double the output voltage of an input power supply or battery, providing +9.35V at 100mA from a +5V input.
A frequency control (FC) pin selects either 10kHz typ or 80kHz typ (40kHz min) operation to optimize capacitor size and quiescent current. The Oscillator frequency CAN also be adjusted with an external capacitor ordriven with an external Clock The MAX660 is a pin-compatible, high 55d -current upgrade of the ICL7660.
The MAX660 is available in both 8-pin DIP and small-outline packages in commercial, extended, and military temperature ranges.
For 50mA applications, consider the MAX860 MAX861 pin-compatible devices (also available in ultra-small MAX packages).
By Maxim Integrated Products
|MAX660M||Texas Instruments||Switched Capacitor Voltage Converter 8-SOIC|
|MAX660MX||Texas Instruments||Switched Capacitor Voltage Converter 8-SOIC|
|MAX660M/NOPB||Texas Instruments||IC SWITCHED CAPACITOR CONVERTER, 80 kHz SWITCHING FREQ-MAX, PDSO8, SO-8, Switching Regulator or Controller|
|MAX660MX/NOPB||Texas Instruments||Switched Capacitor Voltage Converter 8-SOIC|
|MAX660 Pb-Free||MAX660 Cross Reference||MAX660 Schematic||MAX660 Distributor|
|MAX660 Application Notes||MAX660 RoHS||MAX660 Circuits||MAX660 footprint|