µP Supervisory Circuits

The MAX707 MAX708 are cost-effective system supervisor circuits designed to monitor Vcc in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 20 ? sec of Vcc falling through the reset voltage threshold. Reset is maintained with 200 mS of delay time after Vcc rise above the reset threshold. The MAX707 MAX708 have a low quiescent current of 12 ?A at Vcc = 3.3 V, an active-high RESET and active-low RESET with a push-pull output. The output is guaranteed valid down to Vcc = 1.0 V. The MAX707 MAX708 have a Manual Reset MR input and a +1.25 V threshold detector for power-fail input PFI. These devices are available in a Micro8 and SOIC-8 package.
By ON Semiconductor
MAX708 's PackagesMAX708 's pdf datasheet
MAX708CUA-TG
MAX708ESA-TG SOIC
MAX708RCUA-TG
MAX708RESA-TG SOIC
MAX708SCUA-TG
MAX708SESA-TG SOIC
MAX708TCUA-TG
MAX708TESA-TG SOIC
MAX708CUA-T
MAX708ESA-T SOIC
MAX708RCUA-T
MAX708RESA-T SOIC
MAX708SCUA-T
MAX708SESA-T SOIC
MAX708TCUA-T
MAX708TESA-T SOIC




MAX708 Pinout, Pinouts
MAX708 pinout,Pin out
This is one package pinout of MAX708,If you need more pinouts please download MAX708's pdf datasheet.

MAX708 Application circuits
MAX708 circuits
This is one application circuit of MAX708,If you need more circuits,please download MAX708's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX708 Pb-Free MAX708 Cross Reference MAX708 Schematic MAX708 Distributor
MAX708 Application Notes MAX708 RoHS MAX708 Circuits MAX708 footprint