MAX8840, MAX8841, MAX8842 Ultra-Low-Noise, High PSRR, Low-Dropout, 150mA Linear Regulators In µDFN

The MAX8840 MAX8841 MAX8842 ultra-low-noise, low-dropout (LDO) linear Regulators are designed to deliver up to 150mA continuous output current. These Regulators achieve a low 120mV dropout for 120mA load current. The MAX8840 uses an advanced architecture to achieve ultra-low output voltage noise of 11VRMS and PSRR of 54dB at 100kHz.
The MAX8841 does not require a bypass capacitor, hence achieving the smallest PC board area. The MAX8842 output voltage CAN be adjusted with an external divider.
The MAX8840 MAX8841 are preset to a variety of voltages in the 1.5V to 4.5V range. Designed with a p-channel MOSFET series pass Transistor the MAX8840 MAX8841 MAX8842 maintain very low ground current (40A).
The Regulators are designed and optimized to work with low-value, low-cost ceramic capacitors. The MAX8840 requires only 1F (typ) of output capacitance for stability with any load. When disabled, current consumption drops to below 1A.
The MAX8840 MAX8841 MAX8842 are available in a tiny 1mm x 1.5mm x 0.8mm DFN.
By Maxim Integrated Products
MAX8841 's PackagesMAX8841 's pdf datasheet
MAX8841C-DW
MAX8841C-W
MAX8841ELTXYT
MAX8841ELT33T DFN
MAX8841ELT33 DFN
MAX8841ELT29T DFN
MAX8841ELT29 DFN
MAX8841ELT18 DFN
MAX8841ELT25T DFN
MAX8841ELT18T DFN
MAX8841ELT25 DFN




MAX8841 Pinout, Pinouts
MAX8841 pinout,Pin out
This is one package pinout of MAX8841,If you need more pinouts please download MAX8841's pdf datasheet.

MAX8841 Application circuits
MAX8841 circuits
This is one application circuit of MAX8841,If you need more circuits,please download MAX8841's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX8841 Pb-Free MAX8841 Cross Reference MAX8841 Schematic MAX8841 Distributor
MAX8841 Application Notes MAX8841 RoHS MAX8841 Circuits MAX8841 footprint