Charge Pump For Backlight/Flash/RGB LEDs With Safety Timer

The MAX8879 provides complete light management for main Display backlight, subdisplay backlight (or RGB indicator), and white LED camera Flash with regulated constant current up to 610mA total. By utilizing adap- tive 1x/1.5x/2x charge-pump modes and very-low- dropout current Regulators it achieves high efficiency over the full 1-cell Li+ battery input voltage range. The 1MHz fixed-frequency switching allows for tiny external components while the regulation scheme is optimized to ensure low EMI and low input ripple. An integrated derating function protects the LEDs from overheating during high ambient temperatures. The MAX8879 features an internally trimmed reference to set the maximum LED current. An I2C serial port is used for on/off control and setting the LED currents in 32 linear steps for main, sub/RGB, and movie. When using the RGB indicator, the I2C port provides 32k col- ors and programmable ramp-up/down rates. The cam- era Flash for flash-mode operation is enabled by an active-low signal on the FSH pin. A safety Timer is acti- vated on the falling edge of FSH, which has an I2C- adjustable (programmable) period of no Timer 0.5s, 1.0s, or 2.0s (default). If the safety Timer period expires, both Flash and movie modes are disabled. By Maxim Integrated Products
MAX8879 's PackagesMAX8879 's pdf datasheet
MAX8879ETG QFN

MAX8879 pdf datasheet download


MAX8879 Pinout, Pinouts
MAX8879 pinout,Pin out
This is one package pinout of MAX8879,If you need more pinouts please download MAX8879's pdf datasheet.

MAX8879 Application circuits
MAX8879 circuits
This is one application circuit of MAX8879,If you need more circuits,please download MAX8879's pdf datasheet.


Related Electronics Part Number

Related Keywords:

MAX8879 Pb-Free MAX8879 Cross Reference MAX8879 Schematic MAX8879 Distributor
MAX8879 Application Notes MAX8879 RoHS MAX8879 Circuits MAX8879 footprint