MAX9509, MAX9510 1.8V, Ultra-Low Power, DirectDrive Video Filter Amplifiers

Operating from a 1.8V single power supply, the MAX9509 MAX9510 amplify standard-definition Video signals and only consume 5.8mW quiescent power and 11.7mW average power. The MAX9509 MAX9510 leverage Maxim's DirectDrive" technology to generate a clean, internal negative supply. Combining the internal negative power supply with the external positive 1.8V supply, the MAX9509 MAX9510 are able to drive a 2VP-P Video signal into a 150 load.
Besides increasing the output voltage range, Maxim's DirectDrive technology eliminates large output-coupling capacitors and sets the output Video black level near ground. DirectDrive requires an integrated Charge Pump and an internal linear Regulator to create a clean negative power supply so that the Amplifier CAN pull the sync below ground. The Charge Pump injects little noise into the Video output, making the picture visibly flawless.
The MAX9509 MAX9510 are designed to operate from the 1.8V digita 550 l power supply. The high power-supply rejection ratio (49dB at 100kHz) allows the MAX9509 MAX9510 to reject the noise from the digital power supply.
The MAX9509 features an internal reconstruction Filter that smoothes the steps and reduces the spikes on the Video signal from the Video digital-to-analog converter (DAC). The reconstruction Filter typically has 1dB passband flatness of 8.1MHz and 46dB attenuation at 27MHz. The large-signal, 1dB passband flatness of the MAX9510 Video Amplifier is typically 8.4MHz, and the large signal -3dB frequency is typically 11.4MHz.
The input of the MAX9509 MAX9510 CAN be directly connected to the output of a Video DAC The MAX9509 MAX9510 also feature a transparent input sync-tip clamp, allowing AC-coupling of input signals with different DC biases. The MAX9509 MAX9510 have an internal fixed gain of 8. The input full-scale Video signal is nominally 0.25VP-P, and the output full-scale Video signal is nominally 2VP-P. The devices operate from a 1.8V or 2.5V single supply and feature a 10nA low-power shutdown mode. The MAX9509 is offered in an 8-pin TDFN package and the MAX9510 is offered in an 8-pin MAX package.
By Maxim Integrated Products
MAX9510 's PackagesMAX9510 's pdf datasheet

MAX9510 Pinout, Pinouts
MAX9510 pinout,Pin out
This is one package pinout of MAX9510,If you need more pinouts please download MAX9510's pdf datasheet.

MAX9510 Application circuits
MAX9510 circuits
This is one application circuit of MAX9510,If you need more circuits,please download MAX9510's pdf datasheet.

Related Electronics Part Number

Related Keywords:

MAX9510 Pb-Free MAX9510 Cross Reference MAX9510 Schematic MAX9510 Distributor
MAX9510 Application Notes MAX9510 RoHS MAX9510 Circuits MAX9510 footprint