5V ECL 1:4 Clock Distribution Chip

The MC100EL15 , MC10EL15 is a low skew 1:4 Clock Distribution chip designed explicitly for low skew Clock Distribution applications. The device CAN be driven by either a differential or single-ended ECL or, if positive power supplies are used, PECL input signal. If a single-ended input is to be used the VBB output should be connected to the CLK input and bypassed to ground via a 0.01 F capacitor. The VBB output is designed to act as the switching reference for the input of the EL15 under single-ended input conditions, as a result this pin CAN only source/sink up to 0.5mA of current. The EL15 features a multiplexed Clock input to allow for the distribution of a lower speed scan or test Clock along with the high speed system Clock When LOW (or left open and pulled LOW by the input pulldown resistor) the SEL pin will select the differential Clock input. The common enable (ENbar) is synchronous so that the outputs will only be enabled/disabled when they are already in the LOW state. This avoids any chance of generating a runt Clock pulse when the device is enabled/disabled as CAN happen with an asynchronous control. The internal flip flop is clocked on the falling edge of the input Clock therefore all associated specification limits are referenced to the negative edge of the Clock input.The 100 series contains temperature compensation.
By ON Semiconductor
MC100EL15 's PackagesMC100EL15 's pdf datasheet
MC100EL15DG SOIC
MC100EL15DR2G SOIC
MC100EL15D SOIC
MC100EL15DR2 SOIC




MC100EL15 Pinout, Pinouts
MC100EL15 pinout,Pin out
This is one package pinout of MC100EL15,If you need more pinouts please download MC100EL15's pdf datasheet.

MC100EL15 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MC100EL15 Pb-Free MC100EL15 Cross Reference MC100EL15 Schematic MC100EL15 Distributor
MC100EL15 Application Notes MC100EL15 RoHS MC100EL15 Circuits MC100EL15 footprint