5V ECL 1:9 Differential PECL/NECL RAMBus Clock Buffer

The MC10E411 is a low skew 1-to-9 differential driver, designed with Clock Distribution in mind. The MC10E411 's function and performance are similar to the popular MC10E111, with the added feature of 1.2 V output swings. The output voltage swing of the E411 is larger than a standard ECL swing. The 1.2 V output swings provide a signal which CAN be AC coupled into RAMBus compatible input loads. The larger output swings are produced by lowering the VOL of the device. With the exception of the lower VOL , the E411 is identical to the MC10E111. Note that the larger output swings eliminate the possibility of temperature compensated outputs, thus the E411 is only available in the 10E style of ECL. In addition, because the VOL is lower than standard ECL, the outputs cannot be terminated to -2.0 V. This data sheet provides a few termination alternatives. The E411 is specifically designed, modeled and produced with low skew as the key goal. Optimal design and layout serve to minimize Gate to Gate skew within a device, and empirical modeling is used to determine process control limits that ensure consistent tpd distributions from lot to lot. The net result is a dependable, guaranteed low skew device. To ensure that the tight skew specification is met it is necessary that both sides of the differential output are terminated, even if only one side is being used. In most applications, all nine differential pairs will be used and therefore terminated. In the case where fewer than nine pairs are used, it is necessary to terminate at least the output pairs on the same package side as the pair(s) being used on that side, in order to maintain minimum skew. Failure to do this will result in small degradations of propagation delay (on the order of 10-20 ps) of the output(s) being used which, while not being catastrophic to most designs, will mean a loss of skew margin. The MC10E411 as with most other ECL devices, ca
By ON Semiconductor
MC10E411 's PackagesMC10E411 's pdf datasheet
MC10E411FNG PLCC
MC10E411FNR2G PLCC
MC10E411FN PLCC
MC10E411FNR2 PLCC




MC10E411 Pinout, Pinouts
MC10E411 pinout,Pin out
This is one package pinout of MC10E411,If you need more pinouts please download MC10E411's pdf datasheet.

MC10E411 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MC10E411 Pb-Free MC10E411 Cross Reference MC10E411 Schematic MC10E411 Distributor
MC10E411 Application Notes MC10E411 RoHS MC10E411 Circuits MC10E411 footprint