3.3V / 5V ECL Coaxial Cable Driver

The MC10EP89 is a differential fanout Gate specifically designed to drive coaxial cables. The device is especially useful in digital Video broadcasting applications; for this application, since the system is polarity free, each output CAN be used as an independent driver. The driver produces swings 70% larger than a standard ECL output. When driving a coaxial cable, proper termination is required at both ends of the line to minimize signal loss. The 1.6 V (5 V) and 1.4 V (3.3 V) swing allow for termination at both ends of the cable, while maintaining a 800 mV (5 V) and 700 mV (3.3 V) swing at the receiving end of the cable. Because of the larger output swings, the device cannot be terminated into the standard VCC-2.0 V. All of the DC parameters are tested with a 50  to VCC-3.0 V load. The driver accepts a standard differential ECL input and CAN run off of the digital Video broadcast standard -5.0 V supply. By ON Semiconductor
MC10EP89 's PackagesMC10EP89 's pdf datasheet
MC10EP89D SOIC
MC10EP89DG SOIC
MC10EP89DR2 SOIC
MC10EP89DR2G SOIC
MC10EP89DT TSSOP
MC10EP89DTG TSSOP
MC10EP89DTR2 TSSOP
MC10EP89DTR2G TSSOP
MC10EP89MNR4 DFN
MC10EP89MNR4G DFN




MC10EP89 Pinout, Pinouts
MC10EP89 pinout,Pin out
This is one package pinout of MC10EP89,If you need more pinouts please download MC10EP89's pdf datasheet.

MC10EP89 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MC10EP89 Pb-Free MC10EP89 Cross Reference MC10EP89 Schematic MC10EP89 Distributor
MC10EP89 Application Notes MC10EP89 RoHS MC10EP89 Circuits MC10EP89 footprint
Hot categories