HALF BRIDGE GATE DRIVER

The MSK4900 is a complete isolated half bridge Gate driver hybrid capable of working to 600V channel isolation and 8 amps peak turn-on and turn-off current. Housed in an isolated, convenient bolt-down hermetic package, the MSK4900 houses the entire isolated DC-DC Converter circuitry and opto-isolators for Logic signals. The input Logic prevents simulta- neous conduction by locking out both high side and low side drives in case both inputs are asserted ON at the same time. Each Gate drive is capable of sourcing and sinking up to 8 amps peak current. The turn-on and turn-off pins are separate to allow separate Gate current control. Upon detection of a de-saturation condition, a FAULT is presented and the Transistor is shutdown by a separate controlled shutdown pin. The FAULT will have to be cleared before normal operation will begin again. The MSK 4900 has good thermal conductivity due to an isolated substrate/package design that allows direct heat sinking of the device without insulators. By M. S Kennedy
MSK4900 's PackagesMSK4900 's pdf datasheet



MSK4900 Pinout, Pinouts
MSK4900 pinout,Pin out
This is one package pinout of MSK4900,If you need more pinouts please download MSK4900's pdf datasheet.

MSK4900 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MSK4900 Pb-Free MSK4900 Cross Reference MSK4900 Schematic MSK4900 Distributor
MSK4900 Application Notes MSK4900 RoHS MSK4900 Circuits MSK4900 footprint