Improved, Ultra Low Noise ??1.7 G Dual Axis Accelerometer With Absolute Outputs

The MXA2500G M is a low cost, dual axis Accelerometer fabricated on a standard, submicron CMOS process. It is a complete sensing system with on-chip mixed mode signal processing. The MXA2500G M measures acceleration with a full-scale range of 1.7g and a sensitivity of 500mV/g @5V at 25C. It CAN measure both dynamic acceleration (e.g. vibration) and static acceleration (e.g. gravity). The MXA2500G M design is based on heat convection and requires no solid proof mass. This eliminates stiction and particle problems associated with competitive devices and provides shock survival of 50,000 g, leading to significantly lower failure rate and lower loss due to handling during assembly. The MXA2500G M provides two absolute Analog outputs. The typical noise floor is 0.2 mg/ Hz allowing signals below 1 milli-g to be resolved at 1 Hz bandwidth. The 3dB rolloff of the device occurs at 17 Hz but is expandable to >160 Hz (reference Application Note AN-00MX-003). The MXA2500G M is packaged in a hermetically sealed LCC surface mount package (5 mm x 5 mm x 2 mm height) and is operational over a -40C to 105C(M) and 0C to 70C(G) temperature range. By Unkown
MXA2500G 's PackagesMXA2500G 's pdf datasheet



MXA2500G Pinout, Pinouts
MXA2500G pinout,Pin out
This is one package pinout of MXA2500G,If you need more pinouts please download MXA2500G's pdf datasheet.

MXA2500G circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MXA2500G Pb-Free MXA2500G Cross Reference MXA2500G Schematic MXA2500G Distributor
MXA2500G Application Notes MXA2500G RoHS MXA2500G Circuits MXA2500G footprint
Hot categories