Ultra Low Cost, ??1.0 G Dual Axis Accelerometer With Absolute Outputs

The MXA2500J K is an ultra low cost, dual axis Accelerometer fabricated on a standard, submicron CMOS process. The MXA2500J K measures acceleration with a full-scale range of 1.0 g and a sensitivity of 500mV/g @3V power supply at 25C. It CAN measure both dynamic acceleration (e.g., vibration) and static acceleration (e.g., gravity). The MXA2500J K design is based on heat convection and requires no solid proof mass. This eliminates stiction and particle problems, leading to significantly lower failure rates and lower loss due to handling during assembly. The MXA2500J K provides two absolute Analog outputs. The typical noise floor is 1.0 mg/ Hz allowing signals below 2mg to be resolved at 1Hz bandwidth. The MXA2500J K has an inherent low pass frequency response with a 30Hz 3dB cutoff frequency, which eliminates unwanted higher frequency vibrations from obscuring the measurement. The MXA2500J K is available in a LCC surface mount package (5.5mm x 5.5mm x 1.40mm height, with maximum height of 1.50mm). It is operational over a 0C to +70C (J) and -40C to +85C (K) temperature range. By Unkown
MXA2500J 's PackagesMXA2500J 's pdf datasheet
MXA2500JV
MXA2500KV




MXA2500J Pinout, Pinouts
MXA2500J pinout,Pin out
This is one package pinout of MXA2500J,If you need more pinouts please download MXA2500J's pdf datasheet.

MXA2500J circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

MXA2500J Pb-Free MXA2500J Cross Reference MXA2500J Schematic MXA2500J Distributor
MXA2500J Application Notes MXA2500J RoHS MXA2500J Circuits MXA2500J footprint
Hot categories