The ADS7869 is a motor-control front-end that includes three analog-to-digital converters (ADCs) with a total of seven sample-and-hold capacitors and 12 fully differential input channels. There are four sign comparators connected to four input channels. There ...
The L293 and L293D are quadruple high-current half-H drivers. The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages ...
The L293 and L293D are quadruple high-current half-H drivers. The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages ...
The SN754410 is a quadruple high-current half-H driver designed to provide bidirectional drive currents up to 1 A at voltages from 4.5 V to 36 V. The device is designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well ...
The UC3625 family of motorcontroller devices integrate most of the functions required for high-performance brushless dc motor control into one package. When coupled with external power MOSFETs or Darlingtons, these devices perform fixed-frequency PWM motor ...
The UC1637 is a pulse width modulator circuit intended to be used for a variety of PWM motor drive and amplifier applications requiring either uni-directional or bi-directional drive circuits. When used to replace conventional drivers, this circuit can ...
The UC3176/7 family of full bridge power amplifiers is rated for a continuous output current of 2A. Intended for use in demanding servo applications such as disk head positioning, the onboard current sense amplifier can be used to obtain precision control of ...
The UC3178 full-bridge power amplifier, rated for continuous output current of 0.45 Amperes, is intended for use in demanding servo applications. This device includes a precision current sense amplifier that senses load current with a single resistor in series ...
The UC3625 family of motorcontroller devices integrate most of the functions required for high-performance brushless dc motor control into one package. When coupled with external power MOSFETs or Darlingtons, these devices perform fixed-frequency PWM motor ...
The UC1637 is a pulse width modulator circuit intended to be used for a variety of PWM motor drive and amplifier applications requiring either uni-directional or bi-directional drive circuits. When used to replace conventional drivers, this circuit can ...
The UC2638 family of integrated circuits are advanced pulse width modulators intended for a variety of PWM motor drive and amplifier applications requiring either uni-directional or bi-directional drive circuits. Similar in architecture to the UC2637, all ...
The UC3717A is an improved version of the UC3717, used to switch drive the current in one winding of a bipolar stepper motor. The UC3717A has been modified to supply higher winding current, more reliable thermal protection, and improved efficiency by providing ...
The UC3770A and UC3770B are high-performance full bridge drivers that offer higher current and lower saturation voltage than the UC3717 and the UC3770. Included in these devices are LS-TTL compatible logic inputs, current sense, monostable, thermal shutdown, ...
The UC3770A and UC3770B are high-performance full bridge drivers that offer higher current and lower saturation voltage than the UC3717 and the UC3770. Included in these devices are LS-TTL compatible logic inputs, current sense, monostable, thermal shutdown, ...
The UCC3626 motor controller device combines many of the functions required to design a high-performance, two- or four-quadrant, three-phase, brushless dc motor controller into one package. Rotor position inputs are decoded to provide six outputs that control ...
The UCC3626 motor controller device combines many of the functions required to design a high-performance, two- or four-quadrant, three-phase, brushless dc motor controller into one package. Rotor position inputs are decoded to provide six outputs that control ...
The TPIC2101 is a monolithic integrated control circuit designed for direct current (dc) brush motor control that generates a user-adjustable, fixed-frequency, variable duty cycle, pulse width modulated (PWM) signal primarily to control rotor speed of a ...
The TPIC43T01/02 is a monolithic motor control integrated circuit designed to provide RPM control to a 3-phase brushless dc motor. The device provides two analog sensor input ports which include a speed sensor interface and a Hall effect position interface. ...
The TPIC43T01/02 is a monolithic motor control integrated circuit designed to provide RPM control to a 3-phase brushless dc motor. The device provides two analog sensor input ports which include a speed sensor interface and a Hall effect position interface. ...
The LM4570 is a single supply motor driver for improved sensory experience in mobile phones and other handheld devices. The LM4570 is capable of driving up to 192mA while operating from a 3V supply. Near rail-to-rail output swing under load ensures sufficient ...
The LM628,LM629 are dedicated motion-control processors designed for use with a variety of DC and brushless DC servo motors, and other servomechanisms which provide a quadrature incremental position feedback signal. The parts perform the intensive, real-time ...
The LM628,LM629 are dedicated motion-control processors designed for use with a variety of DC and brushless DC servo motors, and other servomechanisms which provide a quadrature incremental position feedback signal. The parts perform the intensive, real-time ...
The LMD18200 is a 3A H-Bridge designed for motion control applications. The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure. Ideal for driving DC and ...
The LMD18201 is a 3A H-Bridge designed for motion control applications. The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure. The H-Bridge configuration ...
The LMD18245 full-bridge power amplifier incorporates all the circuit blocks required to drive and control current in a brushed type DC motor or one phase of a bipolar stepper motor. The multi-technology process used to build the device combines bipolar and ...
The MC33035 is a high performance second generation monolithic brushless DC motor controller MC33035 containing all of the active functions required to implement a full featured open loop, three or four phase motor control system. This device consists of a ...
The FAN73832 is a half-bridge, gate-drive IC with shut-
down and programmable dead-time control functions for
driving MOSFETs and IGBTs, operating up to +600V.
Fairchilds high-voltage process and common-mod
noise canceling technique provide stable ...
The FAN7384 is a monolithic half-bridge gate-drive IC designed for high voltage, high speed driving MOSFETs and IGBTs operating up to +600V.
Fairchilds high-voltage process and common-mode noise canceling technique provide stable operation of high-side ...
The FAN7383 is a half-bridge gate-drive IC with
shutdown and programmable dead-time control
functions for driving MOSFETs and IGBTs that operate
up to +600V.
Fairchilds high voltage process and common-mode
noise canceling technique give stable operation ...
It is an advanced smart power module (SPM) FSBF10CH60BT that Fairchild
has newly developed and designed to provide very compact
and high performance ac motor drives mainly targeting lowpower
inverter-driven application like air conditioner and ...
In the Functional Block Diagram of the HIP4020, the four switches and a load are arranged in an H-Configuration so that the drive voltage from terminals OUTA and OUTB can be cross-switched to change the direction of current flow in the load. This is commonly ...
The ISL6801 is a single monolithic, inverting bootstrap
driver. Its floating Level Shifter Section is optimized for the
control of N-Channel Power MOSFETs in high side
configurations with Bus Voltages up to 120VDC from a 5V
Controller Output. It features ...
The HIP4080A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4080A includes an input comparator, used to facilitate the hysteresis and PWM modes of operation. Its HEN (high ...
The HIP4081A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The HIP4081A can drive every possible switch combination except those which would cause a shoot-through condition. The ...
The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and ...
The HIP4083 is a three phase high side N-channel MOSFET driver, specifically targeted for PWM motor control. Two HIP4083 may be used together for 3 phase full bridge applications (see application block diagram). Alternatively, the lower gates may be controlled ...
The HIP4086 is a Three Phase Bridge N-Channel MOSFET driver IC. The HIP4086 is specifically targeted for PWM motor control. It makes bridge based designs simple and flexible. Like the HIP4081, the HIP4086 has a flexible input protocol for driving every ...
The ISL83202 is a medium-frequency H-Bridge FET driver capable of 1A (typ) of peak drive current that is designed to drive high- and low-side N-Channel MOSFETs in mediumvoltage applications. Optimized for PWM motor control and uninterruptible power supply ...
The ISL83204A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, available in 20 lead plastic SOIC and DIP packages. The ISL83204A includes an input comparator used to facilitate the hysteresis and PWM modes of operation. Its HEN (high ...
The HIP2100 is a high frequency, 100V Half Bridge N-Channel power MOSFET driver IC. The low-side and high-side gate drivers are independently controlled and matched to 8ns. This gives the user maximum flexibility in dead-time selection and driver protocol. ...
The HIP2101 is a high frequency, 100V Half Bridge N-Channel power MOSFET driver IC. It is equivalent to the HIP2100 with the added advantage of full TTL/CMOS compatible logic input pins. The low-side and high-side gate drivers are independently controlled and ...
The ISL2100A, ISL2101A are 100V, high frequency, half-bridge N-channel power MOSFET driver ICs. They are based on the popular HIP2100, HIP2101 half-bridge drivers, but offer several performance improvements. The ISL2100A has additional input hysteresis for ...
The ISL2100A, ISL2101A are 100V, high frequency, half-bridge N-channel power MOSFET driver ICs. They are based on the popular HIP2100, HIP2101 half-bridge drivers, but offer several performance improvements. The ISL2100A has additional input hysteresis for ...
The ISL2110, ISL2111 are 100V, high frequency, half-bridge N-Channel power MOSFET driver ICs. They are based on the popular HIP2100, HIP2101 half-bridge drivers, but offer several performance improvements. Peak output pull-up/ pull-down current has been ...
The ISL2110, ISL2111 are 100V, high frequency, half-bridge N-Channel power MOSFET driver ICs. They are based on the popular HIP2100, HIP2101 half-bridge drivers, but offer several performance improvements. Peak output pull-up/ pull-down current has been ...
The ISL6700 is an 80V/1.25A peak, medium frequency, low cost, half-bridge driver IC available in 8-lead SOIC and 12-lead QFN plastic packages. The low-side and high-side gate drivers are independently controlled and matched to 25ns. This gives the user maximum ...
The ISL89400, ISL89401 are 100V, high frequency, half-bridge N-Channel power MOSFET driver ICs. They are based on the popular HIP2100, HIP2101 half-bridge drivers, but offer several performance improvements. The ISL89400 has additional input hysteresis for ...
The ISL89400, ISL89401 are 100V, high frequency, half-bridge N-Channel power MOSFET driver ICs. They are based on the popular HIP2100, HIP2101 half-bridge drivers, but offer several performance improvements. The ISL89400 has additional input hysteresis for ...
The EL7242/EL7252 dual input, 2-channel drivers achieve the same excellent switching performance of the EL7212 family while providing added flexibility. The 2-input logic and configuration is applicable to numerous power MOSFET drive circuits. As with other ...
The EL7242/EL7252 dual input, 2-channel drivers achieve the same excellent switching performance of the EL7212 family while providing added flexibility. The 2-input logic and configuration is applicable to numerous power MOSFET drive circuits. As with other ...
The ICL7667 is a dual monolithic high-speed driver designed to convert TTL level signals into high current outputs at voltages up to 15V. Its high speed and current output enable it to drive large capacitive loads with high slew rates and low propagation ...
The HS-4080ARH is a monolithic, high frequency, medium voltage Full Bridge N-Channel FET Driver IC. The device includes a TTL-level input comparator, which can be used to facilitate the hysteresis and PWM modes of operation. Its HEN (high enable) lead can ...
The Radiation Hardened HS-4423RH and the HS-4423BRH are inverting, dual, monolithic high-speed MOSFET drivers designed to convert TTL level signals into high current outputs at voltages up to 18V. The inputs of these devices are TTL compatible and can be ...
The Radiation Hardened HS-4424RH and HS-4424BRH are non-inverting, dual, monolithic high-speed MOSFET drivers designed to convert TTL level signals into high current outputs at voltages up to 18V. The inputs of these devices are TTL compatible and can be ...
The Radiation Hardened HS-4424RH and HS-4424BRH are non-inverting, dual, monolithic high-speed MOSFET drivers designed to convert TTL level signals into high current outputs at voltages up to 18V. The inputs of these devices are TTL compatible and can be ...
The Radiation Hardened IS- 1715ARH is a high speed, high current complementary power FET driver designed for use in synchronous rectification circuits. Soft switching transitions for the two output waveforms may be managed by setting the independently ...
The Radiation Hardened HS-1825ARH Pulse Width Modulator is designed to be used in high frequency switched-mode power supplies and can be used in either current-mode or voltage-mode. It is well suited for singleended boost converter applications. Device ...
The single event and total dose hardened IS-1825ASRH pulse width modulator is designed to be used in high frequency, switching power supplies in either voltage or current-mode configurations. The design includes a precision voltage reference, a low power ...
The IS-1845ASRH is designed to be used in switching power supplies operating in current-mode. The rising edge of the on-chip oscillator turns on the output. Turn-off is controlled by the current sense comparator and occurs when the sensed current reaches a ...
The TDA5140A is a bipolar integrated circuit used to drive
3-phase brushless DC motors in full-wave mode. The
device is sensorless (saving of 3 hall-sensors) using the
back-EMF sensing technique to sense the rotor position.
...
The TDA5145TS is a bipolar integrated circuit used to
drive 3-phase brushless DC motors in full-wave mode.
The device is sensorless (saving of 3 hall-sensors) using
the back EMF sensing technique to sense the rotor
position. It includes bidirectional ...
The TDA5145 is a bipolar integrated circuit used to drive
3-phase brushless DC motors in full-wave mode. The
device is sensorless (saving of 3 hall-sensors) using the
back-EMF sensing technique to sense the rotor position.
It includes bidirectional ...
The TDF5140A is a bipolar integrated circuit used to drive
3-phase brushless DC motors in full-wave mode. The
device is sensorless (saving of 3 hall-sensors) using the
back-EMF sensing technique to sense the rotor position.
...
The UBA2032 is a high voltage monolithic integrated
circuit made in the EZ-HV SOI process. The circuit is
designed for driving the MOSFETs in a full bridge
configuration. In addition, it features a disable function, an
internal adjustable oscillator and an ...
The UBA2033 is a high voltage monolithic integrated
circuit made in the EZ-HV SOI process. The circuit is
designed for driving the MOSFETs in a full bridge
configuration. In addition, it features a disable function, an
internal adjustable oscillator and an ...
The PCA2000; PCA2001 are CMOS integrated circuits for battery operated wrist watches
with a 32 kHz quartz crystal as timing element and a bipolar 1 Hz stepping motor. The
quartz crystal oscillator and the frequency divider are optimized for minimum ...
The LT3572 is a highly integrated dual Piezo motor driver capable of driving two Piezo motors at up to 40V with a PWM frequency up to 100kHz from a 5V supply. Each Piezo driver can be independently turned on or off along with the boost converter.
The boost ...
The L293B and L293E are quad push-pull drivers
capable of delivering output currents to 1A per
channel. Each channel is controlled by a TTL-
compatible logic input and each pair of drivers (a
full bridge) is equipped with an inhibit input which
turns off ...
The Device is a monolithic integrated high volt-
age, high current four channel driver designed to
accept standard DTL or TTL logic levels and drive
inductive loads (such as relays solenoides, DC
and stepping motors) and switching power tran-
sistors. The ...
The L298 is an integrated monolithic circuit in a 15-
lead Multiwatt and PowerSO20 packages. It is a
high voltage, high current dual full-bridge driver de-
signed to accept standard TTL logic levels and drive
inductive loads such as relays, solenoids, DC ...
The L6204 is a dual full bridge driver for motor
control applications realized in BCD technology
which combines isolated DMOS power transistors
with CMOS and Bipolar circuits on the same chip.
By using mixed technology it has been possible to
optimize the ...
The L6205 is a DMOS Dual Full Bridge designed for
motor control applications, realized in MultiPower- BCD technology, which combines isolated DMOS
Power Transistors with CMOS and bipolar circuits on
the same chip. Available in PowerDIP20 ...
The L6206 is a DMOS Dual Full Bridge designed for
motor control applications, realized in MultiPower- BCD technology, which combines isolated DMOS
Power Transistors with CMOS and bipolar circuits on
the same chip. Available in PowerDIP24 ...
The L6207 is a DMOS Dual Full Bridge designed for
motor control applications, realized in MultiPower-BCD technology, which combines isolated DMOS
Power Transistors with CMOS and bipolar circuits on
the same chip. The device also includes two inde-
pendent ...
The L6225 is a DMOS Dual Full Bridge designed for
motor control applications, realized in MultiPower-BCD technology, which combines isolated DMOS
Power Transistors with CMOS and bipolar circuits on
the same chip. Available in PowerDIP20 (16+2+2),
PowerSO20 ...
The L6226 is a DMOS Dual Full Bridge designed for
motor control applications, realized in MultiPower-BCD technology, which combines isolated DMOS
Power Transistors with CMOS and bipolar circuits on
the same chip. Available in PowerDIP24 (20+2+2),
PowerSO36 ...
The L6227 is a DMOS Dual Full Bridge designed for
motor control applications, realized in MultiPower- BCD technology, which combines isolated DMOS
Power Transistors with CMOS and bipolar circuits on
the same chip. The device also includes two inde-
pendent ...
The L6227Q is a DMOS Dual Full Bridge
designed for motor control applications, realized
in MultiPower-BCD technology, which combines
isolated DMOS Power Transistors with CMOS and
bipolar circuits on the same chip. The device also
includes two ...
QUAD BTL DRIVER WITH VOLTAGE REGULATOR,This device TDA7473 is a quad power driver circuit in BTL
configuration, intended for use as a power driver
for servo systems with a single supply. ...
The L6234 is a triple half bridge to drive a
brushless motor.
It is realized in Multipower BCD technology which
combines isolated DMOS power transistors with
CMOS and Bipolar circuits on the same chip.
By using mixed technology it has been possible ...
This device L9639 typically drives a direct current motor
servomechanismproviding two extreme end posi -
tions and replaces end position switches or sen-
sors. ...
The L9925 is a dual full bridge driver for stepper
motor applications. Realized in BCD (Bipolar,
CMOS & DOS) techology, logic circuits, precise
linear blocks and power transistors are combined
to optimize circuit performance and minimize off
chip ...
L6258E is a dual full bridge for motor control
applications realized in BCD technology, with the
capability of driving both windings of a bipolar
stepper motor or bidirectionally control two DC
motors.
L6258E and a few external components form a ...
The L165 is a monolithic integrated circuit in Pen-
tawatt, package, intended for use as power oper-
ational amplifier in a wide range of applications,
including servo amplifiers and power supplies. The
high gain and high output power capability ...
The L272 is a monolithic integrated circuits in Pow-
erdip, Minidip and SO packages intended for use as
power operational amplifiers in a wide range of ap-
plications including servo amplifiers and power sup-
plies, compacts disc, VCR, etc.
The high gain ...
The L2720, L2722 and L2724 are monolithic inte-
grated circuits in powerdip, minidip and SIP-9 pack-
ages, intended for use as power operational ampli-
fiers in a wide range of applications including servo
amplifiers and power supplies.
They are ...
The L2720D is a monolithic integrated circuits in SO-
16 package, intended for use as power operational
amplifiers in a wide range of applications including
servo amplifiers and power supplies.
It is particularly indicated for driving, inductive loads,
as ...
The L2726 is a monolithic integrated circuit in SO-20
package intended for use as power operational am-
plifiers in a wide range of applications including servo
amplifiers and power supplies.
It is particularly indicated for driving inductive loads,
as ...
The L297 Stepper Motor Controller IC generates
four phase drive signals for two phase bipolar and
four phase unipolar step motors in microcomputer-
controlled applications. The motor can be driven in
half step, normal and wawe drive modes and on-
chip PWM ...
The L6382D is suitable for microcontrolled
electronic ballasts embedding a PFC stage and a
half-bridge stage. The L6382D includes 4
MOSFET driving stages (for the PFC, for the half
bridge, for the preheating MOSFET) plus a power
management unit (PMU) ...
The L6382D5 is suitable for microcontrolled
electronic ballasts embedding a PFC stage and a
half-bridge stage. The L6382D5 includes 4
MOSFET driving stages (for the PFC, for the half
bridge, for the preheating MOSFET) plus a power
management unit ...
L7207 is a motor controller IC designed for both
desktop and dobile hard disk drive applications.
The spindle motor driver subsystem integrates all
power FETs driven by ST\'s SmoothDrive
commutation technology. The voice coil driver
block includes the ...
L7220 is a motor controller IC designed for both
enterprise and multi-platter desktop hard disk
drive applications.
The spindle motor driver subsystem integrates all
power FETs driven by STs SmoothDrive
commutation technology. ...
The Device is a highly integrated, automated sin-
gle-chip Drive Manager and Disk Drive Controller
IC designed for high-performance, headerless
ATA drive applications. Figure 2 shows the chip
main functional blocks. ...
The AIC-43C97C is an automated, high-performance, integrated, SCSI protocol controller designed for
SCSI-2/SCSI-3 embedded peripheral applications. The AIC-43C97C provides the necessary support for
interfacing the SCSI bus to a peripheral using a DMA bus. It ...
SPEAR-07-NC03 is a smart Communication
Controller for USB and Ethernet Communication.
SPEAR-07-NC03 allows the sharing of a Full-
Speed USB or IEEE1284 or a UART Peripherals
inside an Ethernet System.
SPEAR-07-NC03 is supported by several
Operation ...
The L9803 is a Super Smart Power device suited to drive resistive and inductive loads under
software control. It includes a ST7 microcontroller and some pheripherals. The
microcontroller can execute the software contained in the program ROM and drive, ...
The L9805E is a Super Smart Power device suited to drive resistive and inductive loads
under software control. It includes a ST7 microcontroller and some pheripherals. The
microcontroller can execute the software contained in the program EPROM/ROM and ...