16K-Bit Standard 2-Wire Bus Interface Serial EEPROM

The NM24C16 NM24C17 devices are 16,384 bits of CMOS non-volatile electrically erasable memory. These devices conform to all speci- fications in the Standard IIC 2-wire protocol and are designed to minimize device pin count, and simplify PC board layout require- ments. The upper half (upper 8Kbit) of the memory of the NM24C17 CAN be write protected by connecting the WP pin to VCC. This section of memory then becomes unalterable unless WP is switched to VSS. This Communications protocol uses Clock (SCL) and DATA I/O (SDA) lines to synchronously Clock data between the master (for example a microprocessor) and the slave EEPROM device(s). The Standard IIC protocol allows for a maximum of 16K of EEPROM memory which is supported by the Fairchild family in 2K, 4K, 8K, and 16K devices, allowing the user to configure the memory as the application requires with any combination of EEPROMs In order to implement higher EEPROM memory densities on the IIC bus, the Extended IIC protocol must be used. (Refer to the NM24C32 or NM24C65 datasheets for more infor- mation.) By Fairchild Semiconductor
NM24C16 's PackagesNM24C16 's pdf datasheet
NM24C17




NM24C16 Pinout, Pinouts
NM24C16 pinout,Pin out
This is one package pinout of NM24C16,If you need more pinouts please download NM24C16's pdf datasheet.

NM24C16 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

NM24C16 Pb-Free NM24C16 Cross Reference NM24C16 Schematic NM24C16 Distributor
NM24C16 Application Notes NM24C16 RoHS NM24C16 Circuits NM24C16 footprint