Notes On Using The Ucb1400

After power-up, a reset should be applied to UCB1400 as soon as possible to bring the chip to the default state. This is achieved by performing a complete cold reset sequence (i.e., with both SDATA_OUT and SYNC held at Logic LOW, hold the RESET pin to Logic LOW for at least 1 ┬Ás and then transition to a Logic HIGH). 2.0 Power saving modes The UCB1400 allows individual blocks to be shut down when not used to reduce power consumption. Table 1 lists the settings of some commonly used modes.
application notes                    New application notes
Download application notes and circuits





Related Electronics Part Number
Hot categories