Power Op Amp, Output Signal Swings Within 200mV Of Rails At 2A Output Current

The OPA569 is a low-cost, high-current, Operational Amplifier designed for driving a wide variety of loads while operating on low-voltage supplies. It operates from either single or dual supplies for design flexibility and has Rail-to-Rail swing on the input and output. Typical output swing is within 150mV of the supply rails, with output current of 2A. Output swing closer to the rails is achievable with lighter loads. The OPA569 is unity gain stable, has low dc errors, is easy to use, and free from the phase inversion problems found in some power Amplifiers High performance is maintained at voltage swings near the output rails. The OPA569 provides an accurate user-selected current limit that is set with an external resistor, or digitally adjusted via a digital-to-analog Converter. The OPA569 output CAN be independently disabled using the Enable pin, saving power and protecting the load. The IMONITOR pin provides a 1:475 bidirectional copy of the output current. This eliminates the need for a series current shunt resistor, allowing more voltage to be applied to the load. This pin CAN be used for simple monitoring, or feedback control to establish constant output current. Two flags are provided: one for warning of thermal over-stress, and one for current limit condition. The Thermal Flag pin CAN be connected to the Enable pin to provide a thermal shutdown solution. Packaged in the Texas Instruments PowerPAD?? package, it is small and easy to heat sink. The OPA569 is specified for operation over the extended industrial temperature range, 40C to +85C. By Texas Instruments
Part Manufacturer Description Datasheet Samples
OPA569AIDWPG4 Texas Instruments Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current 20-SO PowerPAD -55 to 125
OPA569AIDWP Texas Instruments Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current 20-SO PowerPAD -55 to 125
OPA569AIDWPRG4 Texas Instruments Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current 20-SO PowerPAD -55 to 125
OPA569AIDWPR Texas Instruments Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current 20-SO PowerPAD -55 to 125
OPA569 's PackagesOPA569 's pdf datasheet
OPA569AIDWP SO
OPA569AIDWPG4 SO
OPA569AIDWPR SO
OPA569AIDWPRG4 SO




OPA569 Pinout, Pinouts
OPA569 pinout,Pin out
This is one package pinout of OPA569,If you need more pinouts please download OPA569's pdf datasheet.

OPA569 Application circuits
OPA569 circuits
This is one application circuit of OPA569,If you need more circuits,please download OPA569's pdf datasheet.


Related Electronics Part Number

Related Keywords:

OPA569 Pb-Free OPA569 Cross Reference OPA569 Schematic OPA569 Distributor
OPA569 Application Notes OPA569 RoHS OPA569 Circuits OPA569 footprint